Bibliography of the person, including all types of documents, not only theses.

PhD theses (1)

1. Mirko Kariž: Vpliv termične modifikacije lesa na utrjevanje lepil in kakovost lepilnih slojev

MSc theses (1)

1. Matevž Klopčič: Oblikovanje in konstruiranje lesenega stola organskih oblik

BSc theses (2)

1. Nejc Nardin: Idejni tehnološki projekt za izdelavo križno lepljenega lesa
2. Danijel Gladoić: Vpliv povzročene deformacije med utrjevanjem lepila na končno trdnost spoja

Other documents (23)

1. Daša Krapež Tomec, Aleš Straže, Matevž Kokot, Manja Kitek Kuzman, Mirko Kariž: Uporaba lesno-plastičnih kompozitov v tehnologiji 4D tiska
2. Mirko Kariž, Manja Kitek Kuzman, Milan Šernek: The effect of heat treatment on the withdrawal capacity of screws in spruce wood
3. Daša Krapež Tomec, Mirko Kariž: Use of wood in additive manufacturing
4. Sebastian Dahle, Jure Žigon, Marko Petrič, Mirko Kariž: Plasma treatment of spruce wood changes its dielectric properties
5. Manja Kitek Kuzman, Mirko Kariž, Martina Zbašnik-Senegačnik: Timber passive house technologies of Slovenian contemporary architecture
6. Jure Žigon, Mirko Kariž, Matjaž Pavlič: Surface finishing of 3D-printed polymers with selected coatings
7. Manja Kitek Kuzman, Mirko Kariž, Martina Zbašnik-Senegačnik: Sodobnih [!] konstrukcij [!] pasivnih hiš v Sloveniji
8. Mirko Kariž, Manja Kitek Kuzman, Milan Šernek: Effect of artificial ageing on adhesive bonds from heat treated spruce
9. Mirko Kariž, Daša Krapež Tomec, Sebastian Dahle, Manja Kitek Kuzman, Milan Šernek, Jure Žigon: Effect of sanding and plasma treatment of 3D-printed parts on bonding to wood with PVAc adhesive
10. Mirko Kariž, Milan Šernek: Lepljenje termično modificiranega lesa
11. Daša Krapež Tomec, Matevž Kokot, Mirko Kariž: Izkoriščanje dimenzijskih sprememb lesno-plastičnih kompozitov za 4D-tisk
12. Seid Hajdarević, Manja Kitek Kuzman, Murčo Obućina, Srečko Vratuša, Tomaž Kušar, Mirko Kariž: Strength and stiffness of 3D-printed connectors compared with the wooden mortise and tenon joints for chairs
13. Jože Kropivšek, Matej Jošt, Petra Grošelj, Manja Kitek Kuzman, Mirko Kariž, Maks Merela, Dominika Gornik Bučar: Innovative model of the cost price calculation of products from invasive non-native wood species based on the FTDABC method
14. Daša Krapež Tomec, Angela Balzano, Jure Žigon, Milan Šernek, Mirko Kariž: The effect of printing parameters and wood surface preparation on the adhesion of directly 3d-printed PLA on wood
15. Daša Krapež Tomec, Aleš Straže, Andreas Haider, Mirko Kariž: Hygromorphic response dynamics of 3D-printed wood-PLA composite bilayer actuators
16. Manja Kitek Kuzman, Milan Šernek, Mirko Kariž: Design and manufacturing of organic shape furniture
17. Sebastian Dahle, Jure Žigon, Marko Petrič, Mirko Kariž: Plasma treatment of spruce wood changes its dielectric properties
18. Mirko Kariž, Milan Šernek: Spremljanje reoloških lastnosti lepil med utrjevanjem
19. Daša Krapež Tomec, Manfred Schöflinger, Jürgen Leßlhumer, Jure Žigon, Miha Humar, Mirko Kariž: Effect of thermal modification of wood on the rheology, mechanical properties and dimensional stability of wood composite filaments and 3D-printed parts
20. Daša Krapež Tomec, Manfred Schöflinger, Jürgen Leßlhumer, Urška Gradišar Centa, Jure Žigon, Mirko Kariž: The effects of microcrystalline cellulose addition on the properties of wood–PLA filaments for 3D printing
21. Daša Krapež Tomec, Matthew Schwarzkopf, Rožle Repič, Jure Žigon, Bojan Gospodarič, Mirko Kariž: Effect of thermal modification of wood particles for wood-PLA composites on properties of filaments, 3D-printed parts and injection moulded parts
22. Mirko Kariž, Bogdan Šega, Milan Šernek, Jure Žigon, Maks Merela: Bonding properties of selected alien invasive wood species
23. Mirko Kariž, Milan Šernek, Manja Kitek Kuzman: Možnosti uporabe lesa v dodajalnih tehnologijah (3D-tiskanju)