izpis_h1_title_alt

Možnosti uporabe lesa v dodajalnih tehnologijah (3D-tiskanju)
ID Kariž, Mirko (Author), ID Šernek, Milan (Author), ID Kitek Kuzman, Manja (Author)

.pdfPDF - Presentation file, Download (1,62 MB)
MD5: 13A64ACE5BBD554CFD8B5FD00EFCD8AF
URLURL - Source URL, Visit https://journals.uni-lj.si/les-wood/article/view/12187 This link opens in a new window

Abstract
Dodajalne tehnologije so v zadnjem desetletju dosegle velik razvoj na področju same tehnike kot tudi materialov za tiskanje. Poseben poudarek je na razvoju materialov, ki bi bili cenejši, iz naravnih virov, brez izpustov škodljivih snovi med postopkom izdelave, z možnostjo uporabe odpadnih surovin ter možnostjo reciklaže po odsluženju. Les oziroma lesni ostanki so ena od možnih surovin, ki bi lahko bile uporabljene za 3D-tiskanje v kombinaciji z naravnimi in sintetičnimi polimeri. Predvidevamo, da se bo v razvoju dodajalnih tehnologij z uporabo lesa širil tudi spekter njihove uporabe na gradbenem področju, recimo tudi pri gradnji montažnih hiš. Narejen je pregled objav na temo 3D-tiskanja v povezavi z naravnimi surovinami, s poudarkom na lesni masi ter postopkih, kjer je možna uporaba lesnih delcev

Language:Slovenian
Keywords:les, 3D-tiskanje, dodajalne tehnologije, lesni ostanki, lesno-plastični kompoziti
Work type:Article
Typology:1.02 - Review Article
Organization:BF - Biotechnical Faculty
Publication status:Published
Publication version:Version of Record
Publication date:01.01.2017
Year:2017
Number of pages:Str. 71-84
Numbering:Letn. 66, št. 2
PID:20.500.12556/RUL-155679 This link opens in a new window
UDC:655.3.066.51:676.15
ISSN on article:0024-1067
DOI:10.26614/les-wood.2017.v66n02a07 This link opens in a new window
COBISS.SI-ID:2845833 This link opens in a new window
Publication date in RUL:11.04.2024
Views:717
Downloads:877
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Les
Shortened title:Les
Publisher:Zveza društev inženirjev in tehnikov gozdarstva in lesarstva Slovenije, Zveza društev inženirjev in tehnikov gozdarstva in lesarstva Slovenije, Biotehniška fakulteta, Oddelek za lesarstvo, Založba Univerze, Biotehniška fakulteta, Oddelek za lesarstvo, Založba Univerze
ISSN:0024-1067
COBISS.SI-ID:13940224 This link opens in a new window

Licences

License:CC BY 4.0, Creative Commons Attribution 4.0 International
Link:http://creativecommons.org/licenses/by/4.0/
Description:This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.

Secondary language

Language:English
Title:Possible uses of wood in additive technologies (3D printing)
Abstract:
Additive manufacturing technologies have developed greatly over the last decade in terms of technology and printing materials. Special emphasis is placed on the development of cheaper materials that are derived from natural sources, without the release of harmful substances during the manufacturing process, with the possibility of using waste materials and recycling after service life. Wood or wood residues are among the potential raw materials that could be used for 3D printing in combinations with natural and synthetic polymers. It is anticipated that, with the development of additive technologies, the use of wood will also expand to the area of structural elements, such as in the construction of prefabricated houses. A review of publications on the topic of 3D printing with natural raw materials with an emphasis on wood biomass and technologies, where the use of wood particles is possible, was made

Keywords:wood, 3D printing, additive technology, wood residues, wood-plastic composites

Projects

Funder:ARRS - Slovenian Research Agency
Project number:P4-0015
Name:Les in lignocelulozni kompoziti

Funder:ARRS - Slovenian Research Agency
Project number:BI-BA-JR-2015/44
Name:Lastnosti lesnih materialov in lepil za 3-D tehnologijo tiskanja

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back