Use of wood in additive manufacturing : review and future prospects

Krapež Tomec, Daša (author), Kariž, Mirko (author)

Polymers filled with natural-based fillers have shown growing demand/interest in recent years, including in additive manufacturing. Like most natural fillers in 3D printing, wood particles serve mainly as a filler that lowers the cost of the printing material due to their low price. However, could wood be used as a main ingredient to affect/improve the properties of 3D-printed parts? Several advantages, such as its reinforcing ability, biodegradability, availability as waste material from other industries, ability to be used in different forms or only in partial components, recycling options or even the use of its undesirable hydromorph-induced dimensional instability for 4D printing, indicate the importance of exploring its use in 3D printing. A review of publications on 3D printing with wood biomass and technologies involving the use of wood particles and components was conducted to identify the possibilities of using wood in additive technologies and their potential.

• Language: English
• Keywords: wood, 3D printing, additive manufacturing, opportunities
• Work type: Article
• Typology: 1.02 - Review Article
• Organization: BF - Biotechnical Faculty
• Publication status: Published
• Publication version: Version of Record
• Year: 2022
• Number of pages: 22 str.
• Numbering: Vol. 14, iss. 6, art. 1174
• PID: 20.500.12556/RUL-137538
• UDC: 630*8
• ISSN on article: 2073-4360
• DOI: 10.3390/polym14061174
• COBISS.SI-ID: 101219331
• Publication date in RUL: 21.06.2022

Record is a part of a journal

• Title: Polymers
• Shortened title: Polymers
• Publisher: Molecular Diversity Preservation International
• ISSN: 2073-4360
• COBISS.SI-ID: 517951257

Licences

• License: CC BY 4.0, Creative Commons Attribution 4.0 International
• Link: http://creativecommons.org/licenses/by/4.0/
• Description: This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.
• Licensing start date: 15.03.2022

Secondary language

• Language: Slovenian
• Keywords: les, dodajalne tehnologije, priložnosti, 3D tisk

Projects

• Funder: ARRS - Slovenian Research Agency
• Project number: P4-0015
• Name: Les in lignocelulozni kompoziti