izpis_h1_title_alt

Influence of friction riveting parameters on the dissimilar joint formation and strength
ID Klobčar, Damjan (Avtor), ID Pušavec, Franci (Avtor), ID Bračun, Drago (Avtor), ID Garašić, Ivica (Avtor), ID Kožuh, Zoran (Avtor), ID Vencl, Aleksandar (Avtor), ID Trdan, Uroš (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,10 MB)
MD5: 3CB355927EB419EC23E553FFFECB404A
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1996-1944/15/19/6812 Povezava se odpre v novem oknu

Izvleček
Friction riveting represents a promising technology for joining similar and/or dissimilar materials of light-weight components. However, the main drawback of the technology is that it is primarily used only with special machines for friction welding that have a force control. In this study we used accessible CNC machines with a position control. A set of friction riveting experiments was performed to establish the relationship between the processing parameters, the rivet formation and its mechanical strength. During the manufacturing process, the axial force and torque were constantly measured. The fabricated joints were examined using an X-ray imaging technique, microstructural analyses, and mechanical tests. The samples were subjected to the pull-out test to analyse the joints’ strength and determine the failure mode type. In addition, a correlation between the friction riveting processing parameters, the rivet penetration depth, the rivet shape and the joint strength was established. The results depict that a higher axial force in the first production phase at the higher feeding rate increases the penetration depth, while in the second phase at lower feeding rate, an anchoring shape of a rivet forms.

Jezik:Angleški jezik
Ključne besede:friction riveting, 2024-T351 aluminium alloy, PEI polymer, X-ray imaging, pull-out force
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Datum objave:01.09.2022
Leto izida:2022
Št. strani:12 str.
Številčenje:Vol. 15, iss. 19, art. 6812
PID:20.500.12556/RUL-141626 Povezava se odpre v novem oknu
UDK:620.178.4:531.4
ISSN pri članku:1996-1944
DOI:10.3390/ma15196812 Povezava se odpre v novem oknu
COBISS.SI-ID:123842051 Povezava se odpre v novem oknu
Datum objave v RUL:03.10.2022
Število ogledov:1231
Število prenosov:69
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Materials
Skrajšan naslov:Materials
Založnik:Molecular Diversity Preservation International
ISSN:1996-1944
COBISS.SI-ID:33588485 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:torno kovičenje, 2024‐T351 Al zlitina, PEI polimer, rentgensko slikanje, digitalna radiografija, izvlečna sila

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0270
Naslov:Proizvodni sistemi, laserske tehnologije in spajanje materialov

Financer:Drugi - Drug financer ali več financerjev
Program financ.:COST Action
Številka projekta:CA18120
Naslov:CERTBOND

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Republic of Slovenia and Republic of Serbia
Številka projekta:BI-RS/20-21-047

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Republic of Slovenia and Republic of Serbia
Številka projekta:337-00-00111/2020-09/50

Financer:MESTD - Ministry of Education, Science and Technological Development of Republic of Serbia
Številka projekta:451-03-68/2022-14/200105

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj