Influence of friction riveting parameters on the dissimilar joint formation and strength

Klobčar, Damjan (avtor), Pušavec, Franci (avtor), Bračun, Drago (avtor), Garašić, Ivica (avtor), Kožuh, Zoran (avtor), Vencl, Aleksandar (avtor), Trdan, Uroš (avtor)

Friction riveting represents a promising technology for joining similar and/or dissimilar materials of light-weight components. However, the main drawback of the technology is that it is primarily used only with special machines for friction welding that have a force control. In this study we used accessible CNC machines with a position control. A set of friction riveting experiments was performed to establish the relationship between the processing parameters, the rivet formation and its mechanical strength. During the manufacturing process, the axial force and torque were constantly measured. The fabricated joints were examined using an X-ray imaging technique, microstructural analyses, and mechanical tests. The samples were subjected to the pull-out test to analyse the joints’ strength and determine the failure mode type. In addition, a correlation between the friction riveting processing parameters, the rivet penetration depth, the rivet shape and the joint strength was established. The results depict that a higher axial force in the first production phase at the higher feeding rate increases the penetration depth, while in the second phase at lower feeding rate, an anchoring shape of a rivet forms.

• Jezik: Angleški jezik
• Ključne besede: friction riveting, 2024-T351 aluminium alloy, PEI polymer, X-ray imaging, pull-out force
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Datum objave: 01.09.2022
• Leto izida: 2022
• Št. strani: 12 str.
• Številčenje: Vol. 15, iss. 19, art. 6812
• PID: 20.500.12556/RUL-141626
• UDK: 620.178.4:531.4
• ISSN pri članku: 1996-1944
• DOI: 10.3390/ma15196812
• COBISS.SI-ID: 123842051
• Datum objave v RUL: 03.10.2022

Gradivo je del revije

• Naslov: Materials
• Skrajšan naslov: Materials
• Založnik: Molecular Diversity Preservation International
• ISSN: 1996-1944
• COBISS.SI-ID: 33588485

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: torno kovičenje, 2024‐T351 Al zlitina, PEI polimer, rentgensko slikanje, digitalna radiografija, izvlečna sila