Zmožnosti in uporabnost Topcon Hybrid Positioning sistema v detajlni izmeri in detajlni zakoličbi : magistrsko delo

Vinko, Danijel (avtor), Kogoj, Dušan (mentor), Stopar, Bojan (komentor)

Magistrsko delo »Zmožnosti in uporabnost Topcon Hybrid Positioning sistema v detajlni izmeri in detajlni zakoličbi« zajema pregled metod geodetske izmere, in sicer tahimetrično izmero, statično izmero GNSS, izmero RTK-GNSS in kombinirano izmero Topcon Hybrid Positioning. Sistem Topcon Hybrid Positioning omogoča istočasno uporabo tahimetrične izmere in izmere GNSS. V prvem delu naloge je narejen pregled sistemov in raziskav na področju kombinirane geodetske izmere, opredeljena pa je tudi problematika kombiniranja terestričnih meritev in opazovanj GNSS. (V prvem, teoretičnem delu naloge je prikazan pregled sistemov in raziskav na področju kombinirane geodetske izmere in opredeljena je problematika kombiniranja terestričnih meritev in opazovanj GNSS. V drugem, praktičnem delu naloge smo na osnovi praktične raziskave ovrednotili natančnost, učinkovitost (poraba časa in število operaterjev) in ekonomičnost kombinirane izmere Topcon Hybrid Positioning ter jo primerjali s tahimetrično izmero, izmero RTK-GNSS in statično izmero GNSS. Raziskava je izvedena na način, da smo koordinate točk začasno stabilizirane izmeritvene mreže določili z že omejenimi geodetskimi metodami izmere. Nato smo koordinate točk izmeritvene mreže, pridobljene z obravnavanimi metodami, primerjali glede na koordinate točk, pridobljenih s statično izmero GNSS, torej smo koordinate točk, pridobljene s statično izmero GNSS, privzeli kot referenčne. Na podlagi analize rezultatov smo v zaključku podali komentarje glede uporabnosti sistema Topcon Hybrid Positioning v geodetski praksi.

• Jezik: Slovenski jezik
• Ključne besede: geodezija, magistrska dela, Topcon Hybrid Positioning, GNSS, kombinirana metoda izmere, izmeritvena mreža
• Vrsta gradiva: Magistrsko delo/naloga
• Tipologija: 2.09 - Magistrsko delo
• Organizacija: FGG - Fakulteta za gradbeništvo in geodezijo
• Kraj izida: Ljubljana
• Založnik: [D. Vinko]
• Leto izida: 2015
• Št. strani: XII, 64 str., 12 str. pril.
• PID: 20.500.12556/RUL-80035
• COBISS.SI-ID: 7325281
• Datum objave v RUL: 05.01.2016

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Ability and applicability of the Topcon Hybrid Positioning System in geodetic surveying and staking out

Izvleček

The master's thesis “Ability and applicability of the Topcon Hybrid Positioning System in geodetic surveying and staking out" provides an overview of the different methods of geodetic survey, geodetic terrestrial surveying, static GNSS positioning, RTK-GNSS positioning and Topcon Hybrid Positioning. Topcon Hybrid Positioning enables the use of GNSS positioning and terrestrial measurements. The theoretical part contains an overview of the systems and pieces of research on the combined method of geodetic surveying and identifies the problem of combining terrestrial measurements and GNSS measurements. The second part constitutes the practical part of the thesis. It is based on the practical research in which we evaluated the accuracy, efficiency (time and number of operators) and economics of the Topcon Hybrid Positioning combined measurements, which we compared to terrestrial surveying, static GNSS positioning and RTK-GNSS positioning. The survey was conducted so that the coordinates of the points of the temporarily established control network were determined by the abovementioned geodetic surveying methods. Moreover, we compared the coordinates of the control network obtained by the methods discussed to the coordinates of the points obtained by the static GNSS measurement, assuming the coordinates of the points obtained by static GNSS measurement as a reference. Based on the analysis of the results, we included our comments in the conclusion on the practicability of the Topcon Hybrid Positioning system in geodetic practice.

• Ključne besede: geodesy, master of science thesis, combined method of geodetic surveying, control network