3D dokumentiranje in interpretacija počivalnika Gondola

Troha, Nika (avtor), Gabrijelčič Tomc, Helena (mentor)

V magistrskem delu je bil predmet raziskave počivalnik Gondola, delo slovenskega industrijskega oblikovalca Oskarja Kogoja. Omenjeni počivalnik je pomemben del slovenske kulturne dediščine in je bil najden v precej slabem stanju, zato je bil primeren za dela 3D-dokumentiranja in nadaljnjih del 3D-rekonstrukcije ter vizualizacije. Za namene dokumentiranja je bilo s fotoaparatom zajeto večje število fotografij z vseh strani počivalnika, na podlagi katerih je bil v programu Autocad ReCap360 izdelan 3D-model z avtomatsko fotogrametrijo. Dobljena mreža je bila primerjana s predhodno zajetim modelom, pridobljenim s skeniranjem na Zavodu za gradbeništvo Slovenije, in na podlagi te primerjave je bil fotogrametrično pridobljen model, izbran za bolj primernega za nadaljevanje dela. Mreža modela je bila najprej popravljena, saj je imela precej nepravilnosti na površini, dno pa je bilo odprto. Sledila so dela teksturiranja in izdelave reliefa na površini, ki je še dodatno pripomogel k bolj realnemu izgledu modela. Na koncu je bila za namene predstavitve pripravljena tudi vizualizacija. Počivalnik Gondola je bil umeščen v okolje dnevne sobe, na podlagi te postavitve pa je bila izdelana animacija, kjer je kamera posnela omenjeno kompozicijo z vseh strani. Animacija je bila del predstavitvenega filma na razstavi v Muzeju za arhitekturo in oblikovanje, kjer si je bilo mogoče ogledati tudi natisnjen 3D-model počivalnika, ki je bil natisnjen na Zavodu za gradbeništvo Slovenije na podlagi našega 3D-modela.

• Jezik: Slovenski jezik
• Ključne besede: kulturna dediščina, avtomatska fotogrametrija, 3D-dokumentiranje, 3D-vizualizacija, muzejska predstavitev
• Vrsta gradiva: Magistrsko delo/naloga
• Organizacija: NTF - Naravoslovnotehniška fakulteta
• Leto izida: 2019
• PID: 20.500.12556/RUL-108198
• Datum objave v RUL: 21.06.2019

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: 3D documentation and interpretation of lounger Gondola

Izvleček

In the thesis, the subject of research was the Gondola lounger, the work of the Slovenian industrial designer Oskar Kogoj. This lounger is an important part of Slovene cultural heritage, and it was found in a rather poor condition, therefore it was suitable for the project of 3D documenting and later 3D reconstruction and visualization. For documenting purposes, a large number of photos was taken from all sides of the lounger. Based on these photos, with the use of Autocad ReCap360 program, a 3D model with automatic photogrammetry was created. The resulting grid mesh was compared with the previously documented model obtained by scanning at the Slovenian Institute of Construction, and on the basis of this comparison, the photogrammetrically obtained model was selected to be more suitable for the continuation of the work. The grid mesh of the model was initially corrected, as it had considerable irregularities on the surface, and the bottom was open too. The texture and surface relief work followed, which further contributed to a more realistic appearance of the model. In the end, visualization was also prepared for the purpose of presentation. The Gondola lounger was placed in the living room environment, and based on this layout, an animation was made, where the camera captured the aforementioned composition from all sides. The animation was part of the presentation film during the exhibition at the Museum of Architecture and Design, where it was also possible to see the 3D-printed model of the lounger, which was printed on the basis of our 3D model at the Slovenian Institute of Construction.

• Ključne besede: cultural heritage, automatic photogrammetry, 3D documenting, 3D visualization, museum presentation