Izdelava in uporaba naprave za branje in manipulacijo omrežja CAN-bus

DEDUKIĆ, TADEJ (avtor), Logar, Vito (mentor)

Magistrsko delo opisuje izdelavo, uporabo in delovanje naprave, ki je ključno orodje za branje in manipulacijo omrežja CAN. Namen izdelave tovrstne naprave je olajšati delo pri predelavi vozila na električni pogon. Naprava nam bo najprej pomagala najti vse ključne signale za predelavo vozila, nato pa nam jih bo pomagala nadomestiti, ko bomo odstranjevali komponente vozila, katerih ne bomo več potrebovali. Magistrsko delo je sestavljeno iz treh delov. V prvem delu je predstavljeno omrežje CAN bus ter njegov namen oz. uporaba. V drugem delu je opisan lasten poskus pri izdelavi orodja za priklop na omrežje CAN, njegova zgradba oz. sestavni deli ter programska oprema, ki je potrebna za delovanje. V tretjem delu je predstavljena metoda branja ter metoda pisanja v omrežje. V tem delu so predstavljeni tudi različni testi oz. rezultati, opravljeni na treh različnih vozilih. Opisuje predvsem težave, katere srečamo pri razpoznavi signalov in določanju pripadajočih senzorjev, vsebuje pa tudi nekatere dosežke, h katerim je naprava prispevala.

• Jezik: Slovenski jezik
• Ključne besede: električna vozila, CAN bus, kolesni elektromotorji, predelava vozila
• Vrsta gradiva: Magistrsko delo/naloga
• Organizacija: FE - Fakulteta za elektrotehniko
• Leto izida: 2019
• PID: 20.500.12556/RUL-107771
• Datum objave v RUL: 24.05.2019

DEDUKIĆ, TADEJ, 2019, Izdelava in uporaba naprave za branje in manipulacijo omrežja CAN-bus [na spletu]. Magistrsko delo. [Dostopano 3 april 2025]. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=107771

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Development and application of a device for reading and manipulation of the CAN-bus network

Izvleček

The master's thesis describes the fabrication, use and operation of the device, which is a key tool for reading and manipulating the CAN network. The purpose of making such a device is to facilitate the work of converting a fossil fuelled vehicle to electric drive. The device will help us to find all crucial signals for the vehicle's conversion, and furthermore help us to replace them when the components that we no longer need are removed. The master's thesis consists of three parts. The first part presents the CAN bus network and its purpose. The second part describes an own try to design a tool for accessing the CAN network, its structure, components and software required for its operation. In the third part, the method of reading and writing to the network is presented. In this part, various tests are also presented. The results were carried out on three different vehicles. It mainly describes the problems that we encounter in the identification of signals and the determination of the associated sensors, together with some of the achievements to which the device contributed.

• Ključne besede: electric vehicles, CAN bus, in-wheel electric motors, vehicle conversion