NAČRTOVANJE IN IZDELAVA MODELA FRANCISOVE TURBINE

ŽIŽEK, BLAŽ (avtor), Gašperič, Samo (mentor)

Namen diplomske naloge je bil izdelava modela Francisove turbine in nazorni prikaz načina njenega delovanja. Diplomsko delo obravnava teoretični in praktični vidik izračuna in izdelave modela Francisove turbine. Osnovna elementa modela sta gonilnik in spiralno ohišje, natisnjena s 3D-tiskalnikom. Delovanje modela smo preizkusili z vodno črpalko. Izračunali smo podtlak v sesalni cevi in njen izkoristek.

• Jezik: Slovenski jezik
• Ključne besede: Francisova turbina, gonilnik, spiralno ohišje, sesalna cev, 3D-tiskalnik
• Vrsta gradiva: Diplomsko delo/naloga
• Organizacija: FE - Fakulteta za elektrotehniko
• Leto izida: 2017
• PID: 20.500.12556/RUL-91032
• Datum objave v RUL: 13.03.2017

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: DESIGN AND CONSTRUCTION OF THE MODEL OF FRANCIS TURBINE

Izvleček

The aim of this thesis is to thoroughly examine the operation of the Francis turbine by creating a turbine model. The thesis presents the theoretical and practical aspect of the calculations and the making of the Francis turbine. There are two crucial parts of the model: a runner and a spiral casing; both have been produced with a 3D printer. The model was tested with a water pump. The pressure in the draft tube and the efficiency of the draft tube have been calculated.

• Ključne besede: Francis turbine, driver, spiral casing, draft tube, 3D printing