Podrobno

On Prediction of 3d Stress State in Elastic Shell by Higher-order Shell Formulations
ID Brank, Boštjan (Avtor), ID Ibrahimbegović, Adnan (Avtor), ID Bohinc, Uroš (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (295,52 KB)
MD5: 54DDD9D458BB4943167334C4947378EF
PID: 20.500.12556/rul/c36e4580-22a6-47be-97af-2496df70017e

Izvleček
In this work we study the accuracy of modem higher-order shell finite element formulations in computation of 3d stress state in elastic shells. In that sense we compare three higher-order shell models: (i) with seven dislacement-like kinematic parameters, and (ii, iii) with six displacement-like kinematic parameters plus one strain-like kinematic parameter introduced by two different versions of enhanced assumed strain (EAS) concept. The finite element approximations of all shell models are based on 4-node quadrilateral elements. Geometrically nonlinear and consistently linearized forms of considered formulations are given. Several numerical examples are presented, where computed stresses are compared with analytical solutions. It was found that through-the-thickness variation of some (non-dominant) stress tensor components, including through-the-thickness normal stress, may be computed very inaccurately. The reliable representation for those stresses can be interpreted only if the ``layer-wise'' averaging or the through-the-thickness averaging is performed.

Jezik:Angleški jezik
Ključne besede:higher-order shell model, 3d constitutive equations, stress computation
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FGG - Fakulteta za gradbeništvo in geodezijo
Založnik:Techno Press
Leto izida:2008
Št. strani:Str. 85-108
Številčenje:Letn. 33, Št. 1
PID:20.500.12556/RUL-32144 Povezava se odpre v novem oknu
UDK:624.074.4
ISSN pri članku:1526-1492
COBISS.SI-ID:4418145 Povezava se odpre v novem oknu
Datum objave v RUL:10.07.2015
Število ogledov:3933
Število prenosov:562
Metapodatki:XML DC-XML DC-RDF
:
BRANK, Boštjan, IBRAHIMBEGOVIĆ, Adnan in BOHINC, Uroš, 2008, On Prediction of 3d Stress State in Elastic Shell by Higher-order Shell Formulations. Computer modeling in engineering & sciences [na spletu]. 2008. Vol. 33, no. Št. 1, p. 85–108. [Dostopano 25 april 2025]. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=32144
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Computer modeling in engineering & sciences
Skrajšan naslov:Comput. model. eng. sci.
Založnik:Tech Science Press
ISSN:1526-1492
COBISS.SI-ID:1931361 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Angleški jezik
Ključne besede:lupine, 3d napetosti

Podobna dela

Podobna dela v RUL:
  1. On composite shell models with a piecewise linear warping function
  2. Multilayered shell finite element with interlaminar continuous shear stresses
  3. Nonlinear shell problem formulation accounting for through-the-thickness stretching and its finite element implementation
  4. Hybrid-mixed low-order finite elements for geometrically exact shell models: overview and comparison
  5. Finite elements for modeling of localized failure in reinforced concrete
Podobna dela v drugih slovenskih zbirkah:
  1. Uporaba elementov višjega reda pri metodi končnih elementov
  2. Symmetry preserving algorithm for large displacement frictionless contact by the pre-discretization penalty method
  3. Numerična simulacija pit testa na poškodovanih pilotih
  4. Geomehanska analiza nosilnosti in posedkov skupin pilotov v gramoznih zemljinah
  5. Geomehanska analiza skupin horizontalno obremenjenih pilotov v gramoznih zemljinah

Nazaj