A measurement system for characterizing the B(H) characteristic of a toroidal core was implemented on the Red Pitaya STEMlab 125-14 development board. A custom FPGA IP core for synchronous excitation signal generation and response acquisition was developed. H(t) and B(t) calculations and a regulation loop ran on the CPU. A sinusoidal waveform of either magnetic field strength H(t) or magnetic flux density B(t), required for the measurement, was achieved using a P-ILC algorithm. The system was tested, and the deviation from the desired sinusoidal shape decreased over successive iterations and fell below 1%, required by IEC 60404-6. A characteristic B(H) hysteresis loop was obtained.
|