Impact of chelating agent choice on growth kinetics and defect chemistry in sol–gel-synthesized Li- and Mn-rich layered cathodes

Badar Abbasi, Rabail (avtor), Bele, Marjan (avtor), Aquilanti, Giuliana (avtor), Plaisier, Jasper Rikkert (avtor), Meden, Anton (avtor), Guerrero Mejía, Luis Miguel (avtor), Dominko, Robert (avtor), Tchernychova, Elena (avtor)

The electrochemical performance and structural stability of Li- and Mn-rich layered oxide cathodes are critically influenced by synthesis conditions, yet the roles of chelating agents and defect chemistry remains elusive. In this study, we systematically investigate Li$_{1.2}$Mn$_{0.54}$Ni$_{0.13}$Co$_{0.13}$O$_{2}$ cathode powders synthesized via the sol−gel method using citric acid or oxalic acid as the chelating agent, each calcined at 850 and 900 °C. Despite introducing greater initial disorder, oxalic acid-derived samples, particularly the one calcined at 900 °C, demonstrate improved electrochemical stability and capacity retention. Operando XRD reveals that this material undergoes a pronounced unit cell expansion during the first cycle, a response linked largely to the mobility and homogenization of oxygen vacancies introduced during the synthesis. This structural flexibility accommodates redox-driven strain during cycling, which limits Li/TM mixing and enables over-reduction of Ni, as confirmed by operando XANES and ex situ EXAFS. These results highlight that oxygen vacancy mobility during cycling dominates the effects of the initial structural order, where different types of defects are present, and plays a decisive role in governing redox pathways and cycling stability. The selection of the precursor allows tailoring introduction of these defects without postsynthesis treatment. This study provides a comprehensive framework for designing high-performance Li- and Mn-rich layered oxide cathodes by tuning synthesis chemistry to engineer beneficial structural disorder and defect dynamics.

• Jezik: Angleški jezik
• Ključne besede: Li-rich layered oxides, Mn-rich layered oxides, oxygen vacancies, stacking faults, chelating agents, redox behavior, cathode design, Li-ion batteries, oxides, oxygen, redox reactions, defects in solids, electrodes
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FKKT - Fakulteta za kemijo in kemijsko tehnologijo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2026
• Št. strani: Str. 16268–16281
• Številčenje: Vol. 18, iss. 11
• PID: 20.500.12556/RUL-189583
• UDK: 544.5/.6
• ISSN pri članku: 1944-8252
• DOI: 10.1021/acsami.5c19987
• COBISS.SI-ID: 274280451
• Datum objave v RUL: 09.10.2026

Gradivo je del revije

• Naslov: ACS applied materials & interfaces
• Skrajšan naslov: ACS appl. mater. interfaces
• Založnik: American Chemical Society
• ISSN: 1944-8252
• COBISS.SI-ID: 516049433

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: elektrokemija, litijionske baterije, oksidi, katode