The master’s thesis investigated the effect of incorporating recycled cotton fibres from waste textile products on the properties of packaging paper. The aim of the research was to determine how different proportions of cotton fibres affected the physical, surface, absorption and printing properties of paper, and which proportion provided the most favourable balance between material usability, production homogeneity and potential application in packaging.
In the experimental part, recycled fibres from 100% cotton textile waste and virgin cellulose were used. Three paper mixtures were prepared with 10%, 20% and 30% proportions of recycled cotton fibres. The paper sheets were hand-formed on a screen, then conditioned and analysed. Grammage, thickness, density, specific volume, Bendtsen roughness, surface water absorption according to the Cobb method, capillary absorption according to the Klemm method and printing properties after digital ultraviolet printing were determined. Print durability was assessed using a rub resistance test, while the usability of the material was further evaluated through the preparation of a gift packaging prototype.
The results showed that the cotton fibres strongly agglomerated during preparation; therefore, both the method of mixture preparation and the sheet-forming process had a significant influence on paper quality. The produced papers were high-grammage, rough, porous and highly absorbent. The most balanced results were achieved by the mixture containing 20% cotton fibres, which showed the best repeatability across several measurements and the highest average optical print density.
It was established that, in its current state, the produced paper was most suitable for decorative or gift packaging. For broader packaging applications, more controlled fibre preparation, industrial production and finishing processes such as sizing, coating and calendering would be required. The hypothesis concerning the influence of fibre content and fibre preparation on paper properties was confirmed, as was the hypothesis that increasing the proportion of cotton fibres increased paper volume. The hypothesis that absorbency improved while surface smoothness decreased was partially confirmed.
|