Anisotropic investigation on morphology, mechanical, corrosion, and cavitation resistance of aluminum alloys produced by wire arc additive manufacturing

Durmuş, Hülya (avtor), Çömez, Nilay (avtor), Klobčar, Damjan (avtor), Gül, Canser (avtor)

The Wire Arc Additive Manufacturing (WAAM) can produce parts that closely approximate the desired geometric shape while reducing costs. Although numerous papers have been published on WAAM manufacturing of different aluminium alloys , there are few studies on the directionality of production. In the present study, WAAM was performed using Cold Metal Transfer (CMT) welding equipment was used to produce sample parts with AlSi5 welding wire. Samples of these parts were produced to determine the mechanical, corrosion and wear properties of build-up and x-y directions. The results indicate that all properties except cavitation resistance were better in the build-up direction than in the x-y direction.

• Jezik: Angleški jezik
• Ključne besede: aluminum, additive manufacturing, wire arc, corrosion, cavitation
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2026
• Št. strani: 7 str.
• Številčenje: Vol. 29, no. 4, art. 290438
• PID: 20.500.12556/RUL-183102
• UDK: 620.193:669.715
• ISSN pri članku: 1302-0900
• DOI: 10.2339/politeknik.1796012
• COBISS.SI-ID: 280500227
• Datum objave v RUL: 04.06.2026

Gradivo je del revije

• Naslov: Politeknik dergisi
• Založnik: Gazi Üniversitesi
• ISSN: 1302-0900
• COBISS.SI-ID: 280481539

Licence

• Licenca: CC BY-SA 4.0, Creative Commons Priznanje avtorstva-Deljenje pod enakimi pogoji 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-sa/4.0/deed.sl
• Opis: Ta licenca Creative Commons je zelo podobna običajni licenci Priznanje avtorstva, vendar zahteva, da so materialne avtorske pravice na izpeljanih delih upravljane z enako licenco.

Sekundarni jezik

• Jezik: Turški jezik
• Naslov: Tel ark eklemeli i̇malat ile üretilen alüminyum alaşımlarının morfolojisi, mekanik, korozyon ve kavitasyon direncinin anizotropik olarak i̇ncelenmesi
• Ključne besede: aluminijeve zlitine, dodajalna izdelava, korozija, kavitacija