Podrobno

Influence of spool impact on preloaded threaded plugs in hydraulic valves
ID Hladnik, Jurij (Avtor), ID Majdič, Franc (Avtor), ID Čelik, Anže (Avtor), ID Jerman, Boris (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (6,91 MB)
MD5: 46E41D05E1FBF1E5F8783D5A54DFF631
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2076-3417/16/11/5366 Povezava se odpre v novem oknu

Izvleček
Preloaded threaded plugs that limit axial movement of spools in hydraulic valves are repeatedly loaded by spool impacts, which affects their fatigue strength. For proper dimensioning of these plugs, their loadings must be known. The aims of the study are to: (a) determine the spool impact force (▫$F_{impact}$▫) on the plug head, (b) determine its influence on the force in the plug neck (FIPN) and (c) give design recommendations and practical considerations for plug–valve connections. Modified versions of the plugs were produced and equipped with strain gauges. The plugs were tightened into valves and loaded with spool impacts at three different pilot pressures. Meanwhile, ▫$F_{impact}$▫, FIPN, pilot pressure, and spool displacement were measured. As the FIPN was measured in the modified plug–valve connections, which had different stiffnesses from the original connections, the FIPN in the original plug–valve connections was calculated by considering the stiffness ratios of the original connections obtained from finite element analyses. The results show that the spool impact force and the resulting additional FIPN increase linearly with pilot pressure. To achieve smaller amplitudes of the FIPN and, consequently, higher fatigue strength, the tensioned parts of the plugs should have lower stiffness and the clamping parts higher stiffness.

Jezik:Angleški jezik
Ključne besede:pre-tightened connection, hydraulic valves, piston strike, clamping force, strain gauges, prestressed fastener
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2026
Št. strani:19 str.
Številčenje:Vol. 16, issue 11, art. 5366
PID:20.500.12556/RUL-182906 Povezava se odpre v novem oknu
UDK:620.178:621.88.082
ISSN pri članku:2076-3417
DOI:10.3390/app16115366 Povezava se odpre v novem oknu
COBISS.SI-ID:279586819 Povezava se odpre v novem oknu
Datum objave v RUL:28.05.2026
Število ogledov:151
Število prenosov:150
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Applied sciences
Skrajšan naslov:Appl. sci.
Založnik:MDPI
ISSN:2076-3417
COBISS.SI-ID:522979353 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:prednapete vijačne zveze, hidravlični ventili, udar bata, sila tesnjenja, merilni lističi, prednapeti vijaki

Projekti

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Poclain Hydraulics d.o.o., Žiri, Slovenija
Številka projekta:20100109631

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj