Podrobno

Evaluation of the colour rendering of brand identity elements on sustainable papers made from invasive alien plant species
ID Možina, Klemen (Avtor), ID Sarjanović, Anja (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,25 MB)
MD5: BAA3E4A70C81C2DE03819D3348855C7A
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2313-433X/12/5/193 Povezava se odpre v novem oknu

Izvleček
The use of invasive plant species for papermaking presents both environmental and economic opportunities, particularly for companies seeking to introduce sustainable materials. This study examined whether paper made from cellulose fibres of Japanese knotweed is suitable for printing business elements such as logos in specific red colours. The physical, mechanical, and optical properties of the paper were compared with those of standard office and commercial Xerox paper. Two printing techniques  electrophotography and inkjet printing  were tested, and the colour differences (CIE colour difference, ΔE) between the reference logo and the prints, with and without the International Colour Consortium (ICC) colour profile, were evaluated. The results showed that the low whiteness and high porosity of the knotweed paper negatively affected colour reproduction, especially in inkjet printing, where even manually optimised profiles did not yield satisfactory results (minimum ΔE > 23). Electrophotography performed better but still had limitations. It was concluded that Japanese knotweed paper is not suitable for professional reproduction of demanding colour elements without additional processing, although it has potential for sustainable applications with lower visual requirements.

Jezik:Angleški jezik
Ključne besede:Japanese knotweed, sustainable printing, invasive alien species, colour reproduction, ICC profiles, colour differences, inkjet printing, electrophotography, brand identity
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:NTF - Naravoslovnotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2026
Št. strani:18 str.
Številčenje:Vol. 12, iss. 5
PID:20.500.12556/RUL-182327 Povezava se odpre v novem oknu
UDK:676
ISSN pri članku:2313-433X
DOI:10.3390/jimaging12050193 Povezava se odpre v novem oknu
COBISS.SI-ID:277348611 Povezava se odpre v novem oknu
Datum objave v RUL:07.05.2026
Število ogledov:110
Število prenosov:125
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Journal of imaging
Skrajšan naslov:J. imaging
Založnik:MDPI AG
ISSN:2313-433X
COBISS.SI-ID:525653017 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:Japonski dresnik, trajnostne tiskovine, invazivne tujerodne rastline, barvna reprodukcija, ICC profili, barvne razlike, kapljični tisk, elektrofotgrafija, blagovna znamka

Projekti

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P2-0450-2024
Naslov:Inovativna grafična tehnologija

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj