The integration of robotics into modern industrial processes has become essential for ensuring competitiveness, as it brings key advantages such as reduced production costs, increased productivity, consistent quality assurance, and significantly improved workplace safety. This thesis discusses the design, programming, and implementation of the robotic cell ROM-42, intended for the automated manipulation of aluminum castings.
The core of the thesis presents the technical integration of two Yaskawa industrial robots GP7 and GP12 with an advanced camera and a programmable logic controller (PLC). The process begins at the input conveyor, where a Keyence VS-L500MX camera determines the position and orientation of randomly oriented parts. This is followed by picking with the first robot, the Yaskawa GP7, which, after verifying the presence of geometric features using sensors on the gripper, transfers the part to the second robot, the Yaskawa GP12, via an intermediate buffer table. The Yaskawa GP12 robot then loads the part into a measuring machine and, upon completion of the measurement, places the product onto the output conveyor. The entire synchronization, safety functions, and communication between subsystems are coordinated by an ET200SP series programmable logic controller.
The thesis provides a detailed presentation of the hardware components, with an emphasis on selecting appropriate motion types (MOVJ, MOVL, MOVC) and configuring the machine vision system. Special attention is given to camera calibration, the determination of intrinsic and extrinsic parameters, and the programming logic required to convert coordinates obtained from the camera into the robot coordinate system.
The goal of this thesis is to design and implement a modular robotic cell with integrated machine vision that, in conjunction with the controller and Yaskawa robots, enables the continuous, repeatable, and safe manipulation of aluminum castings.
|