Podrobno

Local temperature distribution of a plate heat exchanger undergoing crystallization fouling
ID Berce, Jure (Avtor), ID Zupančič, Matevž (Avtor), ID Može, Matic (Avtor), ID Golobič, Iztok (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,96 MB)
MD5: 45E4B9A88BD6EC3A357D3B71D78152FD
URLURL - Izvorni URL, za dostop obiščite https://link.springer.com/article/10.1007/s00231-025-03593-1 Povezava se odpre v novem oknu

Izvleček
The compact design of plate heat exchangers prevents local insights during system operation, which would be desired when designing for and evaluating a given fouling problem. Severe foulant build-up is often confined to specific regions within the flow channel geometry and could be mitigated to an extent by managing the distribution of flow if areas with high susceptibility towards fouling could be identified. We conducted laboratory crystallization fouling experiments on a counter-current brazed plate heat exchanger, coupling real-time measurements of flow rates and temperatures with infrared thermography. This non-intrusive method of spatiotemporal plate temperature characterization allowed local detection and evaluation of severely fouled areas within the upper channel. In the investigated case, the highest susceptibility towards salt crystallization was observed in the flow stagnation zone near the hot outlet, where the largest temperature gradient between both fluids was present and the driving supersaturation was largest. Apart from its use in future plate heat exchanger design, the presented approach can be coupled with computational fluid dynamics simulations, as was illustrated in this work.

Jezik:Angleški jezik
Ključne besede:plate heat exchanger, fouling, crystallization, infrared thermography
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2025
Št. strani:10 str.
Številčenje:Vol. 61, art. 68
PID:20.500.12556/RUL-171236 Povezava se odpre v novem oknu
UDK:536.24:621.565
ISSN pri članku:0947-7411
DOI:10.1007/s00231-025-03593-1 Povezava se odpre v novem oknu
COBISS.SI-ID:246094851 Povezava se odpre v novem oknu
Datum objave v RUL:20.08.2025
Število ogledov:217
Število prenosov:39
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Heat and mass transfer
Skrajšan naslov:Heat mass transf.
Založnik:Springer, Springer-Verl. New York
ISSN:0947-7411
COBISS.SI-ID:2053915 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:ploščni prenosnik toplote, odlaganje nečistoč, kristalizacija, infrardeča termografija

Projekti

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P2-0223
Naslov:Prenos toplote in snovi

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:J2-50085
Naslov:Raziskave medfaznih pojavov kapljic in mehurčkov na funkcionaliziranih površinah ob uporabi napredne diagnostike za razvoj okoljskih tehnologij prihodnosti in izboljšanega prenosa toplote (DroBFuSE)

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj