Podrobno

Operator exposure to vibration and noise during steep terrain harvesting
ID Pajek, Luka (Avtor), ID Šušnjar, Marijan (Avtor), ID Poje, Anton (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (12,39 MB)
MD5: 2E9F7AA16DCD7744191A4455ECDEBA87
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1999-4907/16/5/741 Povezava se odpre v novem oknu

Izvleček
Winch-assisted harvesting has expanded considerably in recent years as it enables ground-based machines to work safely on steep slopes. To analyze operator exposure to whole-body and hand–arm vibration (WBV, HAV) and noise exposure (LAeq, LCpeak) during winch-assisted harvesting (TW) and harvesting without winch assistance (NTW), a field study using a Ponsse Scorpion King harvester and an Ecoforst T-winch traction winch was conducted. Vibrations were measured at three locations inside the cabin (seat, seat base/floor, control lever), while noise exposure was recorded both inside and outside the cabin. WBV exposure during work time operations was highest in the Y-direction, both on the seat (0.49–0.87 m/s2) and on the floor (0.41–0.84 m/s2). The WBV and HAV exposure levels were highest while driving on the forest and skid road. Exposure during the main productive time was significantly influenced by the harvesting system, diameter at breast height (DBH), and tree species. Noise exposure was higher, while WBV and HAV exposures on the seat, floor and control lever were lower during non-work time than during work time. The daily vibration exposure on the seat exceeded the EU action value, while LCpeak noise exposure surpassed the limit value of 140 dB(C) on all measured days. Noise and vibration exposure were constantly higher during TW than NTW harvesting but differences were small. Compared to other studies, the results show that harvesting on steep terrain increases noise and vibration exposure, while non-work time has the opposite effect on vibration and noise exposure.

Jezik:Angleški jezik
Ključne besede:winch-assisted harvesting, ergonomics, safety at work, T-winch, exposure time structure
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:BF - Biotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2025
Št. strani:26 str.
Številčenje:Vol. 16, iss. 5, art. 741
PID:20.500.12556/RUL-169046 Povezava se odpre v novem oknu
UDK:630*30
ISSN pri članku:1999-4907
DOI:10.3390/f16050741 Povezava se odpre v novem oknu
COBISS.SI-ID:235190275 Povezava se odpre v novem oknu
Datum objave v RUL:08.05.2025
Število ogledov:73
Število prenosov:21
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Forests
Skrajšan naslov:Forests
Založnik:MDPI
ISSN:1999-4907
COBISS.SI-ID:3872166 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:sečnja s pomožnimi zunanjimi vitli, ergonomija, varnost pri delu, t-vitel, struktura časa izpostavljenosti

Projekti

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P4-0430
Naslov:Gozdno-lesna veriga in podnebne spremembe: prehod v krožno biogospodarstvo

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Pahernik Foundation

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj