Podrobno

Towards waste-to-energy-and-materials processes with advanced thermochemical combustion intelligence in the circular economy
ID De Greef, Johan (Avtor), ID Hoang, Quynh N. (Avtor), ID Vandevelde, Raf (Avtor), ID Meynendonckx, Wouter (Avtor), ID Bouchaar, Zouhir (Avtor), ID Granata, Giuseppe (Avtor), ID Verbeke, Mathias (Avtor), ID Ishteva, Mariya (Avtor), ID Seljak, Tine (Avtor), ID Van Caneghem, Jo (Avtor), ID Vanierschot, Maarten (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (2,22 MB)
MD5: CBED9E390A996FB7953ADEEDB87CDE8B
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1996-1073/16/4/1644 Povezava se odpre v novem oknu

Izvleček
Waste-to-energy processes remain essential to ensure the safe and irreversible removal of materials and substances that are (or have become) unsuitable for reuse or recycling, and hence, to keep intended cycles of materials in the circular economy clean. In this paper, the behavior of inorganic compounds in waste-to-energy combustion processes are discussed from a multi-disciplinary perspective, against a background of ever tightening emission limits and targets of increasing energy efficiency and materials recovery. This leads to the observation that, due to the typical complexity of thermally treated waste, the intelligence of combustion control systems used in state-of-the-art waste-to-energy plants needs to be expanded to better control the behavior of inorganic compounds that typically end up in waste furnaces. This paper further explains how this goal can be achieved by developing (experimentally validated) predictive numerical models that are engineering-based and/or data-driven. Additionally, the significant economic potential of advanced thermochemical intelligence towards inorganic compounds in waste-to-energy combustion control systems is estimated on the basis of typical operational figures.

Jezik:Angleški jezik
Ključne besede:waste-to-energy, inorganic compounds, combustion control, numerical models, data-driven models, municipal solid waste, raw materials
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2023
Št. strani:19 str.
Številčenje:Vol. 16, iss. 4
PID:20.500.12556/RUL-168739 Povezava se odpre v novem oknu
UDK:621.4
ISSN pri članku:1996-1073
DOI:10.3390/en16041644 Povezava se odpre v novem oknu
COBISS.SI-ID:165018627 Povezava se odpre v novem oknu
Datum objave v RUL:22.04.2025
Število ogledov:935
Število prenosov:338
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Energies
Skrajšan naslov:Energies
Založnik:Molecular Diversity Preservation International
ISSN:1996-1073
COBISS.SI-ID:518046745 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:kontrola izpuhov, numerični modeli

Projekti

Financer:Drugi - Drug financer ali več financerjev
Številka projekta:3E200396
Naslov:Towards continuous combustion of gasified municipal solid waste

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P2-0401-2022
Naslov:Energetsko strojništvo

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj