Podrobno

Fatigue lifetime of rubber composites : state-of-the-art
ID Głowacka, Karolina (Avtor), ID Klemenc, Jernej (Avtor), ID Nagode, Marko (Avtor), ID Łagoda, Tadeusz (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (2,63 MB)
MD5: E87D7E107FFF7294361C50EFF44FD7E9
.pdfPDF - Predstavitvena datoteka, prenos (236,39 KB)
MD5: B20448FFEBFAA09E896912208D6B2BE5
URLURL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0142941825000273 Povezava se odpre v novem oknu

Izvleček
This paper reviews the literature regarding the fatigue strength of rubber composites - with particular emphasis on using rubber as a matrix. Various forms and materials of rubber reinforcement in rubber-based composites were analyzed. The use of 'classic' reinforcements, such as glass, carbon, or aramid fibers, was especially considered. It was noted that carbon reinforcement can take place in various forms - not only in the form of fibers but also, for example, carbon black. Literature data on rubber reinforcement with plastics, silica, or metal elements, e.g., for the production of tires, were analyzed. What is essential from the point of view of ecological aspects is the possibility of strengthening rubber, being a natural material, with natural additives derived from plants. It was observed that in rubber composites, the reinforcement occurs not only in the form of short or granular fibers but also in the form of continuous fibers – especially in the form of cords. The paper focuses on the analysis of the fatigue properties of these composites, identifying the location of the crack and its path, the course of the hysteresis loop, the dependence between and strain under cyclic loading of these materials, and also the computational models used in the fatigue analysis of rubber-based composites.

Jezik:Angleški jezik
Ključne besede:rubber composites, fatigue life prediction, fracture, fatigue of rubber composites
Tipologija:1.02 - Pregledni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2025
Št. strani:14 str.
Številčenje:Vol. 143, art. 108713
PID:20.500.12556/RUL-166910 Povezava se odpre v novem oknu
UDK:620.1/.2
ISSN pri članku:1873-2348
DOI:10.1016/j.polymertesting.2025.108713 Povezava se odpre v novem oknu
COBISS.SI-ID:223073795 Povezava se odpre v novem oknu
Datum objave v RUL:30.01.2025
Število ogledov:554
Število prenosov:128
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Polymer testing
Založnik:Elsevier
ISSN:1873-2348
COBISS.SI-ID:23025669 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Projekti

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Poland, National Science Centre, Weave programme, OPUS
Številka projekta:2022/47/I/ST8/00003
Naslov:Opus

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:N2-0326
Naslov:Eksperimentalna in numerična analiza statičnega in dinamičnega upogibnega obremenjevanja kompozitov z gumeno matrico

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj