Bioresorbability dependence on microstructure of additivelly manufactured and conventionally produced Fe-Mn alloys

Godec, Matjaž (avtor), Kraner, Jakob (avtor), Skobir Balantič, Danijela Anica (avtor), Paulin, Irena (avtor), Drobne, Damjana (avtor), Kononenko, Veno (avtor), Kocijan, Aleksandra (avtor), McGuiness, Paul J. (avtor), Donik, Črtomir (avtor)

Fe-Mn alloys were produced for bioresorbable applications using the laser powder bed fusion (LPBF) process with varying process parameters. The feedstock alloy powder for LPBF was derived from conventional cast/forged bars using plasma ultrasonic atomization. Additionally, a conventionally produced Fe-Mn alloy with the same composition was investigated to compare material properties. The influence of the processing route and LPBF process parameters on microstructure evolution, particularly the formation of Σ boundaries, was examined and correlated with the observed corrosion rate obtained from potentiodynamic curves in Hank’s solution. The concentration of released Fe and Mn ions after immersion tests in lactic acid was also evaluated. The initial corrosion mechanism of the LPBF alloy was elucidated through X-ray photoelectron spectroscopy (XPS). Furthermore, in vitro tests were conducted using MG-63 human osteoblast-like osteosarcoma cells to assess the biocompatibility response. The present study established a correlation between microstructure and corrosion rate, while the biocompatibility tests affirmed the suitability of additively manufactured Fe-Mn alloys for bioresorbable applications.

• Jezik: Angleški jezik
• Ključne besede: Fe-Mn alloy, laser powder bed fusion, bioresorbable, microstructure, corrosion behaviour, biocompatibility
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: BF - Biotehniška fakulteta
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: Str. 4881-4892
• Številčenje: Vol. 30
• PID: 20.500.12556/RUL-166748
• UDK: 669.15:620.19
• ISSN pri članku: 2238-7854
• DOI: 10.1016/j.jmrt.2024.04.097
• COBISS.SI-ID: 193197315
• Datum objave v RUL: 23.01.2025

GODEC, Matjaž, KRANER, Jakob, SKOBIR BALANTIČ, Danijela Anica, PAULIN, Irena, DROBNE, Damjana, KONONENKO, Veno, KOCIJAN, Aleksandra, MCGUINESS, Paul J. in DONIK, Črtomir, 2024, Bioresorbability dependence on microstructure of additivelly manufactured and conventionally produced Fe-Mn alloys. Journal of materials research and technology [na spletu]. 2024. Vol. 30, p. 4881–4892. [Dostopano 19 maj 2025]. DOI 10.1016/j.jmrt.2024.04.097. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=166748

Gradivo je del revije

• Naslov: Journal of materials research and technology
• Skrajšan naslov: J. mater. res. technol.
• Založnik: Elsevier
• ISSN: 2238-7854
• COBISS.SI-ID: 519699737

Licence

• Licenca: CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
• Opis: Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.