Effect of filament material and printing temperature on 3D printing extrusion force : dataset

Kariž, Mirko (avtor), Krapež, Daša (avtor), Kitek Kuzman, Manja (avtor), Obućina, Murčo (avtor), Jusufagić, Muhammed (avtor)

In this study, a modified 3D printer hotend with a load cell attached to the feed system was used to evaluate the effects of filament material composition and printing parameters on the required extrusion force. Four different materials (commercial PLA, pure PLA, wood PLA with different amount of wood particles and wood PLA with different amount of thermally modified wood particles) were used for 3D printing and the feeding resistance was measured. The filament feeder was connected to the extruder hotend via a load cell, which measured the forces required to push the filament through the extruder and nozzle. Three die temperatures of 200, 210 and 220 °C were used.

• Jezik: Angleški jezik
• Ključne besede: 3d print, wood-polymer composites, extrusion force, rheology
• Tipologija: 2.20 - Zaključena znanstvena zbirka raziskovalnih podatkov
• Organizacija: BF - Biotehniška fakulteta
• Leto izida: 2024
• PID: 20.500.12556/RUL-166731
• Metode zbir. podat.: Meritve in testi
• Datum objave v RUL: 23.01.2025

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Projekti

• Financer: ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
• Številka projekta: P4-0015
• Naslov: Les in lignocelulozni kompoziti