Podrobno

The addition of MoO$_3$ or SiO$_2$ nano-/microfillers thermally stabilized and mechanically reinforce the PVDF-HFP/PVP polymer composite thin films
ID Gradišar Centa, Urška (Avtor), ID Pogačnik Krajnc, Anja (Avtor), ID Slemenik Perše, Lidija (Avtor), ID Šobak, Matic (Avtor), ID Mihelčič, Mohor (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (3,27 MB)
MD5: 7117744D2E5706117756E348A12E220E
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2079-6412/14/12/1603 Povezava se odpre v novem oknu

Izvleček
The properties of thin polymer films are influenced by the size of the fillers, their morphology, the surface properties and their distribution/interaction in the polymer matrix. In this work, thin polymer composite films with MoO$_3$ or SiO$_2$ nano and micro fillers in PVDF-HFP/PVP polymer matrix were successfully fabricated using the solvent casting method. The effects of different types, sizes and morphologies of the inorganic fillers on the crystallization of the PVDF-HFP polymer were investigated, as well as the effects on the thermal and mechanical properties of the composites. Scanning electron microscopy, ATR-FTIR spectroscopy, differential scanning calorimetry, nanoindentation and uniaxial mechanical tests were used for characterization. The results showed that MoO$_3$ nanowires thermally stabilized the polymer matrix, induced crystallization of the PVDF-HFP polymer in all three polymorphs (α-, β-, γ-phase) and formed a geometrical network in the polymer matrix, resulting in the highest elastic moduli, hardness and Young’s modulus.

Jezik:Angleški jezik
Ključne besede:polymer composites, crystallization, PVP, PVDF-HFP, mechanical properties, thermal properties
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
FMF - Fakulteta za matematiko in fiziko
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2024
Št. strani:12 str.
Številčenje:Vol. 14, iss. 12, [art. no.] 1603
PID:20.500.12556/RUL-166215 Povezava se odpre v novem oknu
UDK:620.1:532
ISSN pri članku:2079-6412
DOI:10.3390/coatings14121603 Povezava se odpre v novem oknu
COBISS.SI-ID:220430339 Povezava se odpre v novem oknu
Datum objave v RUL:24.12.2024
Število ogledov:557
Število prenosov:128
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Coatings
Skrajšan naslov:Coatings
Založnik:MDPI AG
ISSN:2079-6412
COBISS.SI-ID:523035673 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Projekti

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P2-0264
Naslov:Trajnostni Polimerni materiali in Tehnologije

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P1-0099
Naslov:Fizika mehkih snovi, površin in nanostruktur

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj