izpis_h1_title_alt

The effect of temperature on the transfer layer of an aluminium alloy on tool steel and the effect of CrN coating
ID Kalin, Mitjan (Avtor), ID Jerina, Jure (Avtor), ID Sharma, Sandan Kumar (Avtor), ID Kovač, Janez (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (2,61 MB)
MD5: 8565134562D0B8A9A3E007B11AB45050
URLURL - Izvorni URL, za dostop obiščite https://journals.sagepub.com/doi/full/10.1177/17515831231212633 Povezava se odpre v novem oknu

Izvleček
It is essential to explore temperature's crucial role while unveiling the intricacies of tribological interplay in CrN-coated steel-alloy systems. In the present study, tribological potential of CrN-coated hot-work tool steel was investigated under unidirectional single-pass sliding wear conditions. The sliding wear tests were performed at different temperatures (i.e., 20 °C, 100 °C, 200 °C, 300 °C, 400 °C and 500 °C) for the different sliding distances between 2 mm and 68 mm to explore the effect of temperature on the initiation and evolution of the transfer of an aluminium alloy (EN AW-6060). The effect was studied in terms of the contact area of the aluminium alloy and the volume transferred to the surface of the CrN. In addition, the structure of the wear trace and the equivalent friction coefficient were monitored with respect to the sliding distance and the temperature. The results show the strong dependency of the tribological potential of the CrN coating and the aluminium alloy on the temperature but show insignificant dependency on the sliding distance. When sliding up to 200 °C, the transfer was found to be dependent on the surface roughness of the coating, while strong adhesion led to the aluminium alloy's transfer during sliding at higher temperatures, that is, above 300 °C. At 500 °C, the CrN coating formed a self-protective Cr2O3 oxide that reduced the adhesive transfer of the alloy to the CrN compared to that at 200 °C–300 °C.

Jezik:Angleški jezik
Ključne besede:aluminijeve zlitine, CrN prevleke, prenos materiala, trenje, obraba
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2024
Št. strani:Str. 11-19
Številčenje:Vol. 18, iss. 1
PID:20.500.12556/RUL-156366 Povezava se odpre v novem oknu
UDK:539.92:669.715
ISSN pri članku:1751-5831
DOI:10.1177/17515831231212633 Povezava se odpre v novem oknu
COBISS.SI-ID:196255747 Povezava se odpre v novem oknu
Datum objave v RUL:22.05.2024
Število ogledov:78
Število prenosov:58
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Tribology : materials surfaces & interfaces
Založnik:Maney Publishing
ISSN:1751-5831
COBISS.SI-ID:11678235 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:aluminium alloys, CrN coatings, material transfer, friction, wear

Projekti

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P2-0231
Naslov:Tribologija

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj