izpis_h1_title_alt

LCF behaviour of high strength aluminium alloys AA 6110A and AA 6086
ID Klemenc, Jernej (Avtor), ID Glodež, Srečko (Avtor), ID Steinacher, Matej (Avtor), ID Zupanič, Franc (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (15,65 MB)
MD5: 781884ABB7F58026FBEA402AE4C3B20D
URLURL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0142112323004723 Povezava se odpre v novem oknu

Izvleček
The proposed research presents the comprehensive investigation of the Low Cycle Fatigue (LCF) behaviour of two high-strength aluminium alloys of series AA 6xxx: the conventional alloy AA 6110A and the newly developed alloy AA 6086. Both alloys were characterised in the as-cast condition after homogenisation, extrusion, and T6 heat treatment. The quasi-static strength and hardness of the aluminium alloy AA 6086 were found to be significantly higher if compared to the AA 6110A alloys, while the ductility was a little bit smaller. The LCF tests showed that the AA 6086 alloy is more suitable for the high-cycle fatigue regime. On the other hand, the engineering advantage of the AA 6110A alloy is only for low-cycle fatigue applications if less than 100 loading cycles are expected in the service life of the analysed structure. The fatigue cracks formed predominantly on the α-AlMnSi intermetallic particles in both alloys, and, during LCF tests, exhibited small crack propagation. The area of the fatigue crack growth was much smaller than the area of the forced fracture. At smaller amplitude strains the fatigue striations were present at the fracture surface, while, at higher amplitude strains, they were not present. The obtained experimental results represent a good basis for engineering design applications of the analysed alloys AA 6086 and AA 6110A.

Jezik:Angleški jezik
Ključne besede:aluminium alloys, low cycle fatigue, experimental testing, fractography
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2023
Št. strani:10 str.
Številčenje:Vol. 177, art. 107971
PID:20.500.12556/RUL-152969 Povezava se odpre v novem oknu
UDK:669.715:620.1
ISSN pri članku:0142-1123
DOI:10.1016/j.ijfatigue.2023.107971 Povezava se odpre v novem oknu
COBISS.SI-ID:167923715 Povezava se odpre v novem oknu
Datum objave v RUL:13.12.2023
Število ogledov:144
Število prenosov:29
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:International journal of fatigue
Skrajšan naslov:Int. j. fatigue
Založnik:Elsevier
ISSN:0142-1123
COBISS.SI-ID:25643520 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC 4.0, Creative Commons Priznanje avtorstva-Nekomercialno 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc/4.0/deed.sl
Opis:Licenca Creative Commons, ki prepoveduje komercialno uporabo, vendar uporabniki ne rabijo upravljati materialnih avtorskih pravic na izpeljanih delih z enako licenco.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:aluminijeve zlitine, malociklično utrujanje, eksperimentalno testiranje, fraktografija

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0063
Naslov:Konstruiranje celičnih struktur

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0182
Naslov:Razvojna vrednotenja

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0120
Naslov:Tehnologije metastabilnih materialov

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:J2-8186
Naslov:Razvoj večnamenskih avksetičnih celičnih struktur

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:I0-0029
Naslov:Infrastrukturna dejavnost Univerze v Mariboru

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj