Modal testing and finite element model updating of full-scale hybrid timber-concrete building

Kurent, Blaž (avtor), Ao, Wai Kei (avtor), Pavic, Aleksandar (avtor), Pérez, Fernando (avtor), Brank, Boštjan (avtor)

Serviceability of tall timber and hybrid timber buildings under wind-induced vibrations has become their leading design criterion. Accurate finite element models for predicting their modal properties are crucial for designing buildings that satisfy the current serviceability criteria. It is a challenge for structural engineers to decide what to include in the structural modelling. This is because elements that are typically considered non-structural (partition walls, plasterboards, screed, façade, etc.) have been shown to act structurally and can significantly influence the modal properties of timber buildings. This paper discusses the importance of including certain entities in finite element models of timber and hybrid timber buildings. A case study of a 5-storey hybrid timber-concrete building with masonry cladding is presented. Full-scale in-situ dynamic tests were performed on the building, using forced vibration testing with a shaker. Frequency-response-function-based modal identification resulted in 3 modes of vibration, identifying natural frequencies, mode shapes and damping ratios. A detailed finite element model was developed that estimated the measured natural frequencies with an error of slightly more than 11%. With an extensive sensitivity analysis was found that modelling of the foundation, the effect of the adjacent abutting building in contact, and the masonry cladding was needed. After model updating, it was found that the shear stiffness of CLT walls was initially underestimated, concluding that non-structural elements such as plasterboards and partition walls might influence the dynamic properties of this hybrid timber-concrete building.

• Jezik: Angleški jezik
• Ključne besede: modal testing, timber building, hybrid building, model updating, cross-laminated timber, finite element model, lateral vibrations in service
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FGG - Fakulteta za gradbeništvo in geodezijo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2023
• Št. strani: 14 str.
• Številčenje: Vol. 289, art. 116250
• PID: 20.500.12556/RUL-146411
• UDK: 624.011.1:624.07
• ISSN pri članku: 0141-0296
• DOI: 10.1016/j.engstruct.2023.116250
• COBISS.SI-ID: 152011267
• Datum objave v RUL: 31.05.2023

KURENT, Blaž, AO, Wai Kei, PAVIC, Aleksandar, PÉREZ, Fernando in BRANK, Boštjan, 2023, Modal testing and finite element model updating of full-scale hybrid timber-concrete building. Engineering structures [na spletu]. 2023. Vol. 289, no. 116250. [Dostopano 26 april 2025]. DOI 10.1016/j.engstruct.2023.116250. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=146411

Gradivo je del revije

• Naslov: Engineering structures
• Skrajšan naslov: Eng. struct.
• Založnik: Elsevier
• ISSN: 0141-0296
• COBISS.SI-ID: 7750666

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: modalno testiranje, lesena stavba, hibridna stavba, posodabljanje modela, križno lepljene plošče, model končnih elementov