Impacts of burnishing variables on the quality indicators in a single diamond burnishing operation

Le, Minh-Thai (avtor), Van, An-Le (avtor), Wilk-Jakubowski, Jacek (avtor)

Diamond burnishing is an effective solution to finish a surface. The purpose of the current work is to optimize parameter inputs, including the spindle speed (S), depth of penetration (D), feed rate (f), and diameter of tool-tip (DT) for improving the Vickers hardness (VH) and decreasing the average roughness (Ra) of a new diamond burnishing process. A set of burnishing experiments is executed under a new cooling lubrication system comprising the minimum quantity lubrication and double vortex tubes. The Bayesian regularized feed-forward neural network (BRFFNN) models of the performances are proposed in terms of the inputs. The criteria importance through the inter-criteria correlation (CRITIC) method and non-dominated sorting genetic algorithm based on the grid partitioning (NSGA-G) are applied to compute the weights of responses and find optimality. The optimal outcomes of the S, D, f, and DT were 370 rpm, 0.10 mm, 0.04 mm/rev, and 8 mm, respectively. The improvements in the Ra and VH were 40.7 % and 7.6 %, respectively, as compared to the original parameters. An effective approach combining the BRFFNN, CRITIC, and NSGA-G can be widely utilized to deal with complicated optimization problems. The optimizing results can be employed to enhance the surface properties of the burnished surface.

• Jezik: Angleški jezik
• Ključne besede: single diamond burnishing, average roughness, bayesian regularization, vickers hardness, NSGA-G
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2023
• Št. strani: Str. 155-168
• Številčenje: Vol. 69, no. 3/4
• PID: 20.500.12556/RUL-145168
• UDK: 621.9
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2022.303
• COBISS.SI-ID: 148484355
• Datum objave v RUL: 12.04.2023

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Vpliv parametrov obdelave na kazalnike kakovosti pri finem poliranju z enim diamantom
• Ključne besede: fino poliranje z enim diamantom, povprečna hrapavost, trdota po Vickersu, Bayesova regularizacija, NSGA-G, umetne nevronske mreže, optimumi