izpis_h1_title_alt

Analysis of the dynamic characteristics of a gear-rotor-bearing system with external excitation
ID Na, Risu (Avtor), ID Jia, Kaifa (Avtor), ID Miao, Shujing (Avtor), ID Zhang, WeiGuo (Avtor), ID Zhang, Quan (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (8,71 MB)
MD5: 69CEA1EBA2C2B92AF62FD6DEF1DAD859
URLURL - Izvorni URL, za dostop obiščite https://www.sv-jme.eu/sl/article/analysis-of-the-dynamic-characteristic-of-a-gear-rotor-bearing-system-with-external-excitation/ Povezava se odpre v novem oknu

Izvleček
The dynamic response of the rotor system in a ring die granulator is complex and difficult to solve when it operates under joint external, support and gear mesh forces. To solve this problem, a finite element method and extrusion theory was applied in this study to develop a dynamic coupling model for a hollow overhung rotor with external load excitation. A Newmark-β numerical integration method was used to solve for the dynamic response of the overhung rotor under multiple excitation forces. The results included time-domain response diagrams, frequency-domain response diagrams, phase diagrams, Poincaré section diagrams, and bifurcation diagrams. The model and the method were verified by testing a ring die granulator. On this basis, the dynamic response of the system is predicted according to the influence of different parameters. As the bearing support distance increased, the roller eccentricity decreased, the bearing clearance decreased, the response of the rotor system was significantly optimized, and the system tended to stabilize gradually. Therefore, this paper provides a theoretical basis and experimental verification for the optimization of a pelleting machine transmission structure.

Jezik:Angleški jezik
Ključne besede:rotor dynamics, external incentives, finite element method, bearing, gears
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2023
Št. strani:Str. 17-31
Številčenje:Vol. 69, no. 1/2
PID:20.500.12556/RUL-144877 Povezava se odpre v novem oknu
UDK:621.8
ISSN pri članku:0039-2480
DOI:10.5545/sv-jme.2022.427 Povezava se odpre v novem oknu
COBISS.SI-ID:145704451 Povezava se odpre v novem oknu
Datum objave v RUL:20.03.2023
Število ogledov:300
Število prenosov:18
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:0039-2480
COBISS.SI-ID:762116 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC 4.0, Creative Commons Priznanje avtorstva-Nekomercialno 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc/4.0/deed.sl
Opis:Licenca Creative Commons, ki prepoveduje komercialno uporabo, vendar uporabniki ne rabijo upravljati materialnih avtorskih pravic na izpeljanih delih z enako licenco.

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Analiza dinamičnih lastnosti sistema zobnik–rotor–ležaj z zunanjim vzbujanjem
Ključne besede:dinamika rotorja, zunanje vzbujanje, metoda končnih elementov, ležaji, zobniki, sila pri ekstrudiranju

Projekti

Financer:Drugi - Drug financer ali več financerjev
Program financ.:National Natural Science Foundation of China
Številka projekta:52065050

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Inner Mongolia Autonomous Region of China
Številka projekta:JY20220377

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj