Izračun povesov in napetosti steklenih plošč v štirislojnih zasteklitvenih sistemih

Plešnik, Filip (avtor), Halilovič, Miroslav (mentor), Koc, Pino (komentor)

V okviru magistrske naloge je obravnavana mehanska analiza večslojnih zasteklitev z namenom verifikacije predlagane metode, imenovane LMMG, za izračun napetosti in povesov v štirislojnih zasteklitvenih sistemih. V prvem delu naloge je predstavljena problematika večslojnih zasteklitev ter možnosti za dimenzioniranje le-teh. Poleg teoretičnih izhodišč za reševanje problemov upogiba plošč je podrobneje obravnavan standard EN16612. Ta podaja metodo za izračun napetosti in povesov v dvo- in troslojnih zasteklitvah. V drugem delu naloge je izpeljana metoda LMMG za izračun n-slojnih zasteklitev. Ta je za dvo- in troslojne zasteklitve primerjana s standardom EN16612 in izračuni po metodi končnih elementov v programskem okolju Mepla. Za izbrane primere je z rezultati Meple primerjana tudi za štirislojne zasteklitve. Rezultati analiz kažejo na enakost napetosti in povesov metode LMMG in standarda EN16612 za dvo- in troslojne zasteklitve ter dobro ujemanje rezultatov med metodo LMMG in Meplo za štirislojne zasteklitve.

• Jezik: Slovenski jezik
• Ključne besede: teorija plošč, steklene plošče, večslojne zasteklitve, standard EN16612, metoda končnih elementov
• Vrsta gradiva: Magistrsko delo/naloga
• Tipologija: 2.09 - Magistrsko delo
• Organizacija: FS - Fakulteta za strojništvo
• Kraj izida: Ljubljana
• Založnik: [F. Plešnik]
• Leto izida: 2023
• Št. strani: XX, 62 str.
• PID: 20.500.12556/RUL-144484
• UDK: 666+519.61(043.2)
• COBISS.SI-ID: 143407619
• Datum objave v RUL: 24.02.2023

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Calculation of windowpanes' deflections and stresses in quadruple glazing systems

Izvleček

This thesis deals with the mechanical analysis of multi-layer glazing systems in order to verify the proposed method, named LMMG, for the calculation of stresses and deflections in four-layer (quadruple) glazing systems. In the first part of the thesis, the problems associated with multilayer systems are presented along with the possibilities for their dimensioning. In addition to the theoretical basis for solving panel deflection problems, EN16612 standard, providing a method for calculating stresses and deflections in two- and three-layer glazing systems, is discussed in detail. In the second part of the thesis, LMMG method for the calculation of n-layer glazing systems is derived. Compared were results for a double- and a three-layer system, obtained using three approaches: LMMG, EN16612 standard and finite element method in the Mepla software environment. For selected four-layer cases, the proposed method is also compared with the Mepla results. The results of the analyses show that the stresses and deflections of the proposed LMMG method and EN16612 standard are identical for two and three-layer systems and that there is good agreement between the results of the proposed LMMG method and Mepla for four-layer systems.

• Ključne besede: plate theory, glass panes, multipane glazing, standard EN16612, finite element method