Expansion of the dynamic strain field in 3D-printed structures using a hybrid modeling approach

Kodrič, Miha (avtor), Čepon, Gregor (avtor), Boltežar, Miha (avtor)

The 3D printing of machine components is becoming an established technique. To ensure their robustness and longevity, it is crucial to numerically predict the dynamic response of these components in a variety of operating conditions. Dynamic properties are conventionally obtained in the form of displacement or strain-based response models. However, numerical modeling of the dynamic properties of 3D-printed structures can be a tedious task, mainly due to the complex geometry of the infill pattern and the influence of the printing parameters on the material and geometric properties. Alternatively, the dynamic properties can also be represented in the form of an experimental response model. This reflects the real dynamic properties, but is usually subject to measurement errors and has a low spatial resolution. To integrate the benefits of numerical and experimental response models, we propose a hybrid modeling approach with the System Equivalent Mixing method. The method was extended to a form that could integrate dynamic response models with different physical quantities (displacement and strain). The approach was then analyzed on a 3D-printed beam with a complex infill pattern, where an accurate expansion of the strain response to a high spatial resolution was demonstrated.

• Jezik: Angleški jezik
• Ključne besede: full-field strain response, expansion process PVDF, strain sensors, 3D print, modal analysis, frequency response function
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Recenzirani rokopis
• Datum objave: 10.12.2024
• Leto izida: 2023
• Št. strani: 10 str.
• Številčenje: Vol. 206, art. 112339
• PID: 20.500.12556/RUL-143459
• UDK: 004.925.84:510.643.5
• ISSN pri članku: 0263-2241
• DOI: 10.1016/j.measurement.2022.112339
• COBISS.SI-ID: 134914563
• Datum objave v RUL: 21.12.2022

Gradivo je del revije

• Naslov: Measurement : journal of the International Measurement Confederation
• Skrajšan naslov: Measurement
• Založnik: Elsevier, International Measurement Confederation
• ISSN: 0263-2241
• COBISS.SI-ID: 25917696

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: polje specifičnih deformacij, razširitveni proces, merilna zaznavala, 3D tisk, modalna analiza, frekvenčna prenosna funkcija