izpis_h1_title_alt

Influence of operating conditions on a cast-iron manhole cover
ID Mikelj, Martin (Avtor), ID Nagode, Marko (Avtor), ID Klemenc, Jernej (Avtor), ID Šeruga, Domen (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (4,49 MB)
MD5: 7E601A60771FE72C38BC1ACFCAA00794
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2227-7080/10/6/127 Povezava se odpre v novem oknu

Izvleček
Manhole covers must provide adequate strength and durability over the intended service life. In addition to operating loads, the lifespan of cast-iron manhole covers is strongly influenced by the conditions of installation and cover placement after opening or closing. These can include a vertical displacement from the plane of the carriageway during installation or the settlement of the terrain around the cover afterwards. After opening and closing the cover, the lid often only partially touches the support surface due to stones or other impurities caught on the surface or under the cover. These events can significantly affect the lifespan of the cover. In this study, an improved geometry of the cast-iron cover is proposed and analysed from an operational strength point of view. Initially, the geometry and potential critical points were scrutinized, and typical loads on the cover were determined. A numerical model was then set to simulate the behaviour during typical operation. In the simulations, the impact of the critical scenarios was analysed by dividing the impact parameters into individual levels. The simulation results reveal the suitability of the improved cover geometry.

Jezik:Angleški jezik
Ključne besede:manhole covers, design, operating conditions, durability, cast iron
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Datum objave:01.12.2022
Leto izida:2022
Št. strani:10 str.
Številčenje:Vol. 10, iss. 6, art. 127
PID:20.500.12556/RUL-143222 Povezava se odpre v novem oknu
UDK:658.512.2
ISSN pri članku:2227-7080
DOI:10.3390/technologies10060127 Povezava se odpre v novem oknu
COBISS.SI-ID:132950531 Povezava se odpre v novem oknu
Datum objave v RUL:08.12.2022
Število ogledov:391
Število prenosov:69
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Technologies
Skrajšan naslov:Technologies
Založnik:MDPI AG
ISSN:2227-7080
COBISS.SI-ID:523413017 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:pokrovi jaškov, konstruiranje, obratovalni pogoji, zdržljivost, siva litina

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0182
Naslov:Razvojna vrednotenja

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj