Experimental investigation of buckling stability of superelastic Ni-Ti tubes under cyclic compressive loading : towards defining functionally stable tubes for elastocaloric cooling

Porenta, Luka (avtor), Trojer, Jonas (avtor), Brojan, Miha (avtor), Tušek, Jaka (avtor)

Elastocaloric cooling technology recently attracted significant attention as an environmental friendly alternative to vapor-compression technology. It is based on the elastocaloric effect, which occurs in superelastic shape memory alloys (SMAs) during stress-induced martensitic transformation. To date, several proof-of-concept devices (mostly based on tensile loading) have been developed, but limited fatigue life was shown to be one of the major issues. Compressive loading improves the fatigue life of such devices significantly, but in return buckling of SMA structure might occur. To overcome this challenge, it is crucial to understand the buckling phenomena of SMA structures, especially for thin-walled tubes that seem to be ideal candidates for application in elastocaloric cooling devices. Here, we experimentally investigated the effects of the diameter-to-thickness ratio (D$_{out}$/t) and slenderness (λ) on buckling stability of Ni-Ti tubes that were subjected to cyclic compressive loading. In total, 161 superelastic Ni-Ti tubes with outer diameter (D$_{out}$) ranging from 2 mm to 3 mm, D$_{out}$/t ranging from 5 to 25 and gauge lengths (L$_g$) ranging from 6 to 20 mm were tested. The loading procedure consisted of 3 parts: (I) 1 isothermal full-transformation loading cycle, (II) 50 training cycles, and (III) 20 adiabatic cycles to simulate loading conditions in elastocaloric device. We constructed experimental phase diagrams of buckling modes in λ – D$_{out}$/t space for constant D$_{out}$ and in λ – D$_{out}$ space for constant D$_{out}$/t ratio. Marked areas of functionally stable tubes in these phase diagrams give the design guidance for future developments of durable and efficient elastocaloric devices and other applications, e.g. actuators and dampers.

• Jezik: Angleški jezik
• Ključne besede: shape-memory materials, elastocaloric effect, stability of cylindrical shells, shape-memory, buckling, mode shape, cyclic loading, compression
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2022
• Št. strani: 15 str.
• Številčenje: Vol. 256, art. 111948
• PID: 20.500.12556/RUL-141266
• UDK: 539.3
• ISSN pri članku: 0020-7683
• DOI: 10.1016/j.ijsolstr.2022.111948
• COBISS.SI-ID: 122518275
• Datum objave v RUL: 27.09.2022

PORENTA, Luka, TROJER, Jonas, BROJAN, Miha in TUŠEK, Jaka, 2022, Experimental investigation of buckling stability of superelastic Ni-Ti tubes under cyclic compressive loading : towards defining functionally stable tubes for elastocaloric cooling. International journal of solids and structures [na spletu]. 2022. Vol. 256,  111948. [Dostopano 8 april 2025]. DOI 10.1016/j.ijsolstr.2022.111948. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=141266

Gradivo je del revije

• Naslov: International journal of solids and structures
• Skrajšan naslov: Int. j. solids struct.
• Založnik: Pergamon Press
• ISSN: 0020-7683
• COBISS.SI-ID: 997903

Licence

• Licenca: CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
• Opis: Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: materiali z oblikovnim spominom, elastokalorični učinek, stabilnost cilindričnih lupin

Projekti

• Financer: EC - European Commission
• Program financ.: H2020
• Številka projekta: 803669
• Naslov: Superelastic Porous Structures for Efficient Elastocaloric Cooling
• Akronim: SUPERCOOL