New methodology of dynamical material response of dissimilar FSWed Al alloy joint under high strain rate laser shock loading

Ayad, Mohammad (avtor), Lapostolle, Lucas (avtor), Rondepierre, Alexandre (avtor), Le Bras, Corentin (avtor), Ünaldi, Selen (avtor), Donik, Črtomir (avtor), Klobčar, Damjan (avtor), Berthe, Laurent (avtor), Trdan, Uroš (avtor)

This paper presents an innovative methodology of material characterization under high strain rate (order of 10$^7$s$^{–1}$) laser shock loading coupled with microstructural and mechanical material features. To that scope, experimental and simulation analyses have been conducted for Al alloys (AA7075-T6 and AA2017-T4) and dissimilar Friction Stir Welded (FSWed) AA7075-AA2017 joint, under shock pressure of 4.5 GPa (laser power density of 3.5 GW/cm$^2$). In order to perform proper in-depth material model simulation of these alloys and dissimilar pairs, Johnson–Cook (J-C) material model has been coupled with Grüneisen equation of state using the non-linear explicit code LS-DYNA. For the first time, we provided a way to differentiate between material behaviour in the cross-section and the in-plane rolling and welding direction. What is more, we have provided the link between microstructural features and mechanical properties such as microhardness, residual stresses and the identified material parameters. By achieving this goal, the bigger difference between studied planes was confirmed for strain hardening modulus, strain hardening exponent and strain rate sensitivity parameters. Obtained results and proposed methodology indicate high potential to predict material properties and behaviour of dynamically stressed parts and at the same time can be used for optimization of LSP process.

• Jezik: Angleški jezik
• Ključne besede: friction stir welding, FSW, dissimilar Al alloys, laser induced shock wave propagation, VISAR analysis, dynamic simulation
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2022
• Št. strani: 15 str.
• Številčenje: Vol. 222, art. 111080
• PID: 20.500.12556/RUL-139027
• UDK: 621.791.1:699.715
• ISSN pri članku: 0264-1275
• DOI: 10.1016/j.matdes.2022.111080
• COBISS.SI-ID: 118983939
• Datum objave v RUL: 29.08.2022

Gradivo je del revije

• Naslov: Materials & design
• Skrajšan naslov: Mater. des.
• Založnik: Scientific and Technical Press
• ISSN: 0264-1275
• COBISS.SI-ID: 10626075

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: varjenje s trenjem in mešanjem, raznorodne aluminijeve zlitine, laserski udarni valovi, VISAR analize, dinamične simulacije