izpis_h1_title_alt

Treatment of wood with atmospheric plasma discharge : study of the treatment process, dynamic wettability and interactions with a waterborne coating
ID Žigon, Jure (Avtor), ID Pavlič, Matjaž (Avtor), ID Kibleur, Pierre (Avtor), ID Van den Bulcke, Jan (Avtor), ID Petrič, Marko (Avtor), ID Van Acker, Joris (Avtor), ID Dahle, Sebastian (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (2,54 MB)
MD5: 367B5BB9415CAFC8B5A2AFB76888143D
URLURL - Izvorni URL, za dostop obiščite https://www.degruyter.com/document/doi/10.1515/hf-2020-0182/html Povezava se odpre v novem oknu

Izvleček
Plasma treatment is becoming a mature technique for modification of surfaces of various materials, including wood. A better insight in the treatment process and the impact of the plasma on properties of wood bulk are still needed. The study was performed on Norway spruce and common beech wood, as well as their thermally modified variations. The formations of the airborne discharge, as well as mass changes of the treated wood, were monitored. The impact of such treatment on wood-coating interaction was investigated by evaluating the dynamic wettability and penetration into wood. At the wood surface, plasma streamers were observed more intense on denser latewood regions. Wood mass loss was higher with increasing number of passes through the plasma discharge and was lower for thermally modified wood than for unmodified wood. Plasma treatment increased the surface free energy of all wood species and lowered the contact angles of a waterborne coating, these together indicating enhanced wettability after treatment. Finally, the distribution and penetration depth of the coating were studied with X-ray microtomography. It was found that the coating penetrated deeper into beech than into spruce wood. However, the treatment with plasma increased the penetration of the coating only into spruce wood.

Jezik:Angleški jezik
Ključne besede:beech, coatings, plasma, spruce, wettability, wood
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:BF - Biotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2021
Št. strani:Str. 603-613
Številčenje:Vol. 75, iss. 7
PID:20.500.12556/RUL-138685 Povezava se odpre v novem oknu
UDK:630*8
ISSN pri članku:1437-434X
DOI:10.1515/hf-2020-0182 Povezava se odpre v novem oknu
COBISS.SI-ID:43142147 Povezava se odpre v novem oknu
Datum objave v RUL:09.08.2022
Število ogledov:617
Število prenosov:98
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Holzforschung
Skrajšan naslov:Holzforschung
Založnik:De Gruyter
ISSN:1437-434X
COBISS.SI-ID:22548741 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:bukev, premazi, plazma, smreka, omočljivost, les

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P4-0015
Naslov:Les in lignocelulozni kompoziti

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Research Foundation – Flanders (FWO), SBO project
Številka projekta:S003418N
Akronim:MoCCHa-CT

Financer:EC - European Commission
Program financ.:H2020
Številka projekta:745936
Naslov:Demonstration and implementation of an integrated process for the Plasma-Enhanced Chemical Solution Deposition of PMMA-multicomponent coatings on wood and wood-based substrates
Akronim:PlasmaSolution

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj