izpis_h1_title_alt

Surface properties of coated MDF pre-treated with atmospheric plasma and the influence of artificial weathering
ID Žigon, Jure (Avtor), ID Pavlič, Matjaž (Avtor), ID Petrič, Marko (Avtor), ID Dahle, Sebastian (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (9,66 MB)
MD5: 9DDDB0E805434F030BFF61C1FDC4EC9E
URLURL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0254058421001413 Povezava se odpre v novem oknu

Izvleček
A non-thermal plasma treatment generated in air at atmospheric pressure was used for surface modification of medium density fiberboard (MDF) substrate. Untreated and plasma-treated substrates were coated with a waterborne acrylic coating and exposed to accelerated artificial weathering (AAW) in interior mode. Plasma treatment increased the surface free energy of MDF by about 50%, which positively influenced on the wettability of the MDF with the coating. Weathering of the coated MDF caused a decrease in surface gloss and color changes, which were less pronounced for plasma-treated samples. Attenuated total reflection Fourier transform infrared spectra and microscopic analysis revealed degradation of the acrylic resin on the coated MDF due to light irradiation during weathering. After 250 h of weathering, the surface roughness of the coated MDF increased by about 3 μm. The coated MDF surfaces started to lose their hydrophobic character after 50 h of weathering. Finally, the determination of mechanical properties showed that coated MDF became more resistant to scratching during AAW, while the adhesion of the coating film to the MDF substrate was not affected in a significant trend with time of AAW. In both cases, no influence of plasma treatment was detected.

Jezik:Angleški jezik
Ključne besede:coating, medium density fiberboard, plasma, surface, weathering
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:BF - Biotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2021
Št. strani:12 str.
Številčenje:Vol. 263, art. 124358
PID:20.500.12556/RUL-138640 Povezava se odpre v novem oknu
UDK:630*8
ISSN pri članku:0254-0584
DOI:10.1016/j.matchemphys.2021.124358 Povezava se odpre v novem oknu
COBISS.SI-ID:53436419 Povezava se odpre v novem oknu
Datum objave v RUL:05.08.2022
Število ogledov:1001
Število prenosov:78
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Materials chemistry and physics
Skrajšan naslov:Mater. chem. phys.
Založnik:Elsevier
ISSN:0254-0584
COBISS.SI-ID:15481349 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:vlaknene plošče, premazi, plazma, površine, staranje

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P4-0015
Naslov:Les in lignocelulozni kompoziti

Financer:EC - European Commission
Program financ.:H2020
Številka projekta:745936
Naslov:Demonstration and implementation of an integrated process for the Plasma-Enhanced Chemical Solution Deposition of PMMA-multicomponent coatings on wood and wood-based substrates
Akronim:PlasmaSolution

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj