Use of wood in additive manufacturing : review and future prospects

Krapež Tomec, Daša (avtor), Kariž, Mirko (avtor)

Polymers filled with natural-based fillers have shown growing demand/interest in recent years, including in additive manufacturing. Like most natural fillers in 3D printing, wood particles serve mainly as a filler that lowers the cost of the printing material due to their low price. However, could wood be used as a main ingredient to affect/improve the properties of 3D-printed parts? Several advantages, such as its reinforcing ability, biodegradability, availability as waste material from other industries, ability to be used in different forms or only in partial components, recycling options or even the use of its undesirable hydromorph-induced dimensional instability for 4D printing, indicate the importance of exploring its use in 3D printing. A review of publications on 3D printing with wood biomass and technologies involving the use of wood particles and components was conducted to identify the possibilities of using wood in additive technologies and their potential.

• Jezik: Angleški jezik
• Ključne besede: wood, 3D printing, additive manufacturing, opportunities
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.02 - Pregledni znanstveni članek
• Organizacija: BF - Biotehniška fakulteta
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2022
• Št. strani: 22 str.
• Številčenje: Vol. 14, iss. 6, art. 1174
• PID: 20.500.12556/RUL-137538
• UDK: 630*8
• ISSN pri članku: 2073-4360
• DOI: 10.3390/polym14061174
• COBISS.SI-ID: 101219331
• Datum objave v RUL: 21.06.2022

Gradivo je del revije

• Naslov: Polymers
• Skrajšan naslov: Polymers
• Založnik: MDPI
• ISSN: 2073-4360
• COBISS.SI-ID: 517951257

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 15.03.2022

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: les, dodajalne tehnologije, priložnosti, 3D tisk

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P4-0015
• Naslov: Les in lignocelulozni kompoziti