izpis_h1_title_alt

Design of a shear test fixture system and optimization of a metal shear specimen for cyclic loading
ID Litrop, Aljaž (Avtor), ID Klemenc, Jernej (Avtor), ID Nagode, Marko (Avtor), ID Šeruga, Domen (Avtor)

URLURL - Izvorni URL, za dostop obiščite https://www.astm.org/jte20210681.html Povezava se odpre v novem oknu

Izvleček
The objective of the present paper is to investigate the optimization of the existing sheet metal specimen geometry and the optimization of fixtures for fatigue shear tests. Simple static shear tests are used for the material characterization of sheet metal and composite materials. It is well known that it is difficult to achieve pure shear conditions in the specimens because of stress concentrations. Moreover, buckling must be prevented during cyclic tensile and compressive loads, which can be achieved with suitable fixtures. This paper proposes a symmetric specimen geometry for alternating in-plane loads, where the location of crack initiation is predicted and stress concentration is minimized. The design of the geometry was supported with numerical simulations. According to the final specimen geometry, unique fixtures were developed, based in part on the standard ASTM D7078, Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method, solution. The fixtures allow operation at elevated temperatures, easy specimen change, universal use on different test rigs, and possible extension to other specimen shapes. By the proposed fixture system, any type of cyclic test can be performed (i.e., alternating, pulsating, or variable). The fixtures are suitable for measuring strain with mechanical extensometers, video extensometers, or digital image correlation. The experimental shear tests on aluminum 6061 specimens showed comparable shear strain fields as calculated by the finite element method.

Jezik:Angleški jezik
Ključne besede:fatigue, shear, optimisation, fixture systems, digital image correlation method
Vrsta gradiva:Članek v reviji (dk_c)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2022
Status objave pri reviji:V tisku
Verzija članka:Postprint, avtorjeva končna recenzirana različica članka, sprejeta v objavo
Datum objave:04.04.2022
Št. strani:13 str.
Številčenje:Vol. 50, iss. 5
PID:20.500.12556/RUL-136458 Povezava se odpre v novem oknu
UDK:620.178:004.3
ISSN pri članku:0090-3973
DOI:10.1520/JTE20210681 Povezava se odpre v novem oknu
COBISS.SI-ID:106633987 Povezava se odpre v novem oknu
Datum objave v RUL:05.05.2022
Število ogledov:100
Število prenosov:19
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Journal of testing and evaluation
Skrajšan naslov:J. test. eval.
Založnik:American Society for Testing and Materials
ISSN:0090-3973
COBISS.SI-ID:7021061 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:utrujanje, strig, optimizacija, vpenjalne naprave, metoda digitalne korelacije slik

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije (ARRS)
Številka projekta:P2-0182
Naslov:Razvojna vrednotenja

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj