izpis_h1_title_alt

The influence of shot peening and artificially ageing aluminium alloy 7075 on corrosion behaviour
ID Žagar, Sebastjan (Avtor), ID Mrvar, Primož (Avtor), ID Grum, Janez (Avtor), ID Šturm, Roman (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (4,84 MB)
MD5: 1C38E43CD3730306D4F511B29A5580E7
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1996-1944/15/9/3094 Povezava se odpre v novem oknu

Izvleček
This paper investigates the corrosion of shot peened AA7075 aluminium alloys aged at different temperatures. The surface integrity of the hardened layer was evaluated with SEM, EDS, differential scanning calorimetry, hardness, and roughness measurements, and in the end also with corrosion resistance tests. The research results indicated that there were significant differences in precipitates distribution between aluminium alloys artificially aged at different temperatures. As the ageing temperature increases, the microhardness decreases, which influences the final roughness condition of the surface layer after shot peening. The results of potentiodynamic polarisation tests indicate that shot peening enables shifting the pitting potential to positive values, which ensures slightly higher corrosion resistance. SEM images confirmed the dissolution of the aluminium matrix near the separated iron-rich phases of the Al$_x$ form (Fe, Mn) by the action of galvanic cells.

Jezik:Angleški jezik
Ključne besede:aluminium alloy 7075, shot peening, ageing temperature, pitting corrosion, cyclic polarisation, intermetallic particles
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
NTF - Naravoslovnotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2022
Št. strani:13 str.
Številčenje:Vol. 15, iss. 9, art. 3094
PID:20.500.12556/RUL-136334 Povezava se odpre v novem oknu
UDK:620.1:621.787.6:669.715
ISSN pri članku:1996-1944
DOI:10.3390/ma15093094 Povezava se odpre v novem oknu
COBISS.SI-ID:105816579 Povezava se odpre v novem oknu
Datum objave v RUL:25.04.2022
Število ogledov:551
Število prenosov:115
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Materials
Skrajšan naslov:Materials
Založnik:MDPI
ISSN:1996-1944
COBISS.SI-ID:33588485 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:aluminijeva zlitina 7075, udarno utrjevanje, temperatura staranja, jamičasta korozija, ciklična polarizacija

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0270
Naslov:Proizvodni sistemi, laserske tehnologije in spajanje materialov

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj