The measurement of the wear of tie rod end components

Wozniak, Marek (author), Rylski, Adam (author), Siczek, Krzysztof (author)

This study aimed to determine the wear intensity of the bearing mating with the ball stud in the tie rod end. The course of the vehicle driving during the period between repairs of the steering assembly was assumed. The modelled scheme of cornering was assumed to be close to the real one. The model of steering mechanism allowing determination of the load of the stud of the tie rod end as a function of the steering angle was elaborated and presented. The model of the ball stud was realized and described. The values of wear intensity for components were calculated and presented.

• Language: English
• Keywords: tie rod ends, wear degree, finite element method, steering mechanism system
• Typology: 1.02 - Review Article
• Organization: FS - Faculty of Mechanical Engineering
• Publication status: Published
• Publication version: Version of Record
• Year: 2022
• Number of pages: Str. 101-125
• Numbering: Vol. 68, no. 2
• PID: 20.500.12556/RUL-135446
• UDC: 539.375.6:519.62
• ISSN on article: 0039-2480
• DOI: 10.5545/sv-jme.2021.7389
• COBISS.SI-ID: 100958467
• Publication date in RUL: 15.03.2022

Record is a part of a journal

• Title: Strojniški vestnik
• Shortened title: Stroj. vestn.
• Publisher: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licences

• License: CC BY 4.0, Creative Commons Attribution 4.0 International
• Link: http://creativecommons.org/licenses/by/4.0/
• Description: This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.
• Licensing start date: 02.02.2022
• Applies to: Accepted for publication

Secondary language

• Language: Slovenian
• Title: Meritve obrabe komponent končnikov
• Keywords: končniki, stopnja obrabe, metoda končnih elementov, sistem krmilnega mehanizma, kontaktni tlak, mast, stisnjen film