The measurement of the wear of tie rod end components

Wozniak, Marek (avtor), Rylski, Adam (avtor), Siczek, Krzysztof (avtor)

This study aimed to determine the wear intensity of the bearing mating with the ball stud in the tie rod end. The course of the vehicle driving during the period between repairs of the steering assembly was assumed. The modelled scheme of cornering was assumed to be close to the real one. The model of steering mechanism allowing determination of the load of the stud of the tie rod end as a function of the steering angle was elaborated and presented. The model of the ball stud was realized and described. The values of wear intensity for components were calculated and presented.

• Jezik: Angleški jezik
• Ključne besede: tie rod ends, wear degree, finite element method, steering mechanism system
• Tipologija: 1.02 - Pregledni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2022
• Št. strani: Str. 101-125
• Številčenje: Vol. 68, no. 2
• PID: 20.500.12556/RUL-135446
• UDK: 539.375.6:519.62
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2021.7389
• COBISS.SI-ID: 100958467
• Datum objave v RUL: 15.03.2022

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 02.02.2022
• Vezano na: Accepted for publication

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Meritve obrabe komponent končnikov
• Ključne besede: končniki, stopnja obrabe, metoda končnih elementov, sistem krmilnega mehanizma, kontaktni tlak, mast, stisnjen film