20.500.12556/RUL-135446 The measurement of the wear of tie rod end components Meritve obrabe komponent končnikov This study aimed to determine the wear intensity of the bearing mating with the ball stud in the tie rod end. The course of the vehicle driving during the period between repairs of the steering assembly was assumed. The modelled scheme of cornering was assumed to be close to the real one. The model of steering mechanism allowing determination of the load of the stud of the tie rod end as a function of the steering angle was elaborated and presented. The model of the ball stud was realized and described. The values of wear intensity for components were calculated and presented. tie rod ends wear degree finite element method steering mechanism system končniki stopnja obrabe metoda končnih elementov sistem krmilnega mehanizma kontaktni tlak mast stisnjen film true false true Angleški jezik Slovenski jezik Neznano 2022-03-15 11:52:25 2022-03-15 11:52:28 2022-09-14 04:13:22 0000-00-00 00:00:00 2022 0 0 Str. 101-125 no. 2 Vol. 68 Feb. 2022 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 539.375.6:519.62 0039-2480 10.5545/sv-jme.2021.7389 100958467 RAZ_Wozniak_Marek_2022.pdf RAZ_Wozniak_Marek_2022.pdf 1 6180C6BE52CF7A63B935DFF47D96BE74 d910f605274e25de8c9af8e73c6c7ba44977208a0506c82ef251a02d14fb3fd6 4498a40b-a44e-11ec-8556-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=154531 https://www.sv-jme.eu/sl/article/a-determination-of-wear-of-tie-rod-end-components/ 1 018925b1-a44e-11ec-8556-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=154530 Fakulteta za strojništvo Strojniški vestnik 0 0 0