Criticality and life-cycle assessment of materials used in fuel-cell and hydrogen technologies

Mori, Mitja (avtor), Stropnik, Rok (avtor), Sekavčnik, Mihael (avtor), Lotrič, Andrej (avtor)

The purpose of this paper is to obtain relevant data on materials that are the most commonly used in fuel-cell and hydrogen technologies. The focus is on polymer-electrolyte-membrane fuel cells, solid-oxide fuel cells, polymer-electrolyte-membrane water electrolysers and alkaline water electrolysers. An innovative, methodological approach was developed for a preliminary material assessment of the four technologies. This methodological approach leads to a more rapid identification of the most influential or critical materials that substantially increase the environmental impact of fuel-cell and hydrogen technologies. The approach also assisted in amassing the life-cycle inventories—the emphasis here is on the solid-oxide fuel-cell technology because it is still in its early development stage and thus has a deficient materials’ database—that were used in a life-cycle assessment for an in-depth material-criticality analysis. All the listed materials—that either are or could potentially be used in these technologies—were analysed to give important information for the fuel-cell and hydrogen industries, the recycling industry, the hydrogen economy, as well as policymakers. The main conclusion from the life-cycle assessment is that the polymer-electrolyte-membrane water electrolysers have the highest environmental impacts; lower impacts are seen in polymer-electrolyte-membrane fuel cells and solid-oxide fuel cells, while the lowest impacts are observed in alkaline water electrolysers. The results of the material assessment are presented together for all the considered materials, but also separately for each observed technology.

• Jezik: Angleški jezik
• Ključne besede: critical materials, fuel cells, electrolysers, hydrogen technologies, criticality, life-cycle assessment
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: 29 str.
• Številčenje: Vol. 13, iss. 6, art. 3565
• PID: 20.500.12556/RUL-135056
• UDK: 502.171:531.62(045)
• ISSN pri članku: 2071-1050
• DOI: 10.3390/su13063565
• COBISS.SI-ID: 57362179
• Datum objave v RUL: 18.02.2022

Gradivo je del revije

• Naslov: Sustainability
• Skrajšan naslov: Sustainability
• Založnik: MDPI
• ISSN: 2071-1050
• COBISS.SI-ID: 5324897

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 23.03.2021

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: kritični materiali, gorivne celice, elektrolizerji, vodikove tehnologije, kritičnost, študija življenjskih ciklov