izpis_h1_title_alt

Thermodynamic behavior of Fe-Mn and Fe-Mn-Ag powder mixtures during selective laser melting
ID Kraner, Jakob (Avtor), ID Medved, Jože (Avtor), ID Godec, Matjaž (Avtor), ID Paulin, Irena (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (5,96 MB)
MD5: 604C5F9FA3BC64A2888A62C336264FD0
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2075-4701/11/2/234 Povezava se odpre v novem oknu

Izvleček
Additive manufacturing is a form of powder metallurgy, which means the properties of the initial metal powders (chemical composition, powder morphology and size) impact the final properties of the resulting parts. A complete characterization, including thermodynamic effects and the behavior of the metal powders at elevated temperatures, is crucial when planning the manufacturing process. The analysis of the Fe-Mn and Fe-Mn-Ag powder mixtures, made from pure elemental powders, shows a high susceptibility to sintering in the temperature interval from 700 to 1000 °C. Here, numerous changes to the manganese oxides and the αMn to βMn transformation occurred. The problems of mechanically mixed powders, when using selective laser melting, were highlighted by the low flowability, which led to a less controllable process, an uncontrolled arrangement of the powder and a large percentage of burnt manganese. All this was determined from the altered chemical compositions of the produced parts. The impact of the increased manganese content on the decreased probability of the transformation from γ-austenite to ε-martensite was confirmed. The ε-martensite in the microstructure increased the hardness of the material, but at the same time, its magnetic properties reduce the usefulness for medical applications. However, the produced parts had comparable elongations to human bone.

Jezik:Angleški jezik
Ključne besede:FeMn alloys, powder metallurgy, differential scanning calorimetry, selective laser melting, ε-martensite
Vrsta gradiva:Članek v reviji (dk_c)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:NTF - Naravoslovnotehniška fakulteta
Leto izida:2021
Status objave pri reviji:Objavljeno
Verzija članka:Založnikova različica članka
Št. strani:11 str.
Številčenje:Vol. 11, iss. 2, art. 234
UDK:620.1/.2
ISSN pri članku:2075-4701
DOI:10.3390/met11020234 Povezava se odpre v novem oknu
COBISS.SI-ID:49402627 Povezava se odpre v novem oknu
Datum objave v RUL:10.02.2022
Število ogledov:209
Število prenosov:50
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Metals
Skrajšan naslov:Metals
Založnik:MDPI
ISSN:2075-4701
COBISS.SI-ID:15976214 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:01.02.2021

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije (ARRS)
Številka projekta:J2-1729
Naslov:Nova biorazgradljiva Fe-Mn zlitina izdelana s konvencionalnim postopkom in s postopkom dodajnih tehnologij s prilagojeno biorazgradljivostjo

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije (ARRS)
Številka projekta:P2-0132
Naslov:Fizika in kemija površin kovinskih materialov

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj