izpis_h1_title_alt

Development of a unified reversed-phase HPLC method for efficient determination of EP and USP process-related impurities in celecoxib using analytical quality by design principles
ID Tome, Tim (Avtor), ID Časar, Zdenko (Avtor), ID Obreza, Aleš (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (3,34 MB)
MD5: 366A8516583E380A914C1420CA745085
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1420-3049/25/4/809 Povezava se odpre v novem oknu

Izvleček
This article presents the development of a reversed-phase (RP) high-performance liquid chromatographic (HPLC) method for determination of process-related impurities in a celecoxib drug substance following Analytical Quality by Design (AQbD) principles. The method from European Pharmacopeia (EP) for celecoxib drug substance does not sufficiently separate celecoxib from its EP impurity B because the system suitability criterion is not achieved (resolution NLT 1.8). The same issue was observed with the proposed method from United States Pharmacopeia (USP) for celecoxib capsules, where EP impurity A elutes under the main peak. A new HPLC method was developed that eliminates the disadvantages of the two pharmacopeial methods and is capable of efficiently separating and determining all seven impurities listed in EP and the proposed USP monographs. The development of a new HPLC method started with method scouting, in which various C18 and phenyl stationary phases were tested. Improved selectivity was obtained only with a chiral stationary phase. An immobilized Chiralpak IA-3 column used in RP mode turned out to be the most appropriate for method optimization. The ratio of acetonitrile in the mobile phase, flow rate, and column temperature were recognized as critical method parameters (CMPs) and were further investigated using a central composite face response-surface design. A multiple linear regression (MLR) method was applied to fit the mathematical models on the experimental data to determine factor–response relationships. The models created show adequate fit and good prediction abilities. The Monte Carlo simulation method was used to establish the design space. The method developed was verified in terms of precision, sensitivity, accuracy, and linearity, and the results showed that the new method is suitable for determination of seven process-related impurities of celecoxib.

Jezik:Angleški jezik
Ključne besede:RP-HPLC, AQbD, HPLC method development, HPLC method optimization, pharmacopeia, celecoxib
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FFA - Fakulteta za farmacijo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2020
Št. strani:18 str.
Številčenje:Vol. 25, iss. 4, art. 809
PID:20.500.12556/RUL-133205 Povezava se odpre v novem oknu
UDK:543.544.5:615.11:54
ISSN pri članku:1420-3049
DOI:10.3390/molecules25040809 Povezava se odpre v novem oknu
COBISS.SI-ID:4882289 Povezava se odpre v novem oknu
Datum objave v RUL:17.11.2021
Število ogledov:605
Število prenosov:129
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Molecules
Skrajšan naslov:Molecules
Založnik:MDPI
ISSN:1420-3049
COBISS.SI-ID:18462981 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:13.02.2020

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:celekoksib, farmakopeja, tekočinska kromatografija, farmacevtska kemija

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj