Mechanical characterization and structural attributes of biohybrid composites derived using hemp, bamboo, and jute fibres : an alternative approach in the application of natural fibres in automobile parts

Bose, Rajmohan (avtor), Kandavel, Arunachalam (avtor)

In the present work, three natural fibres, namely jute, hemp and bamboo have been hybridized with seashell powder and polypropylene resin as biohybrid composites. Nine samples are considered for this study with various weight propositions of bamboo, hemp, and jute. The mechanical characteristics, such as the flexural, impact, and tensile strength of nine samples, are compared, and the Sample 9 shows very good results; the obtained flexural, tensile strength and impact energy of Sample 9 are 239.36 MPa, 47.84 MPa, and 18.33 J, respectively. The main reason for this is the presence of jute material and layering pattern; Sample 9 contains 60 % Jute, 20 % hemp, and 20 % bamboo; the percentage of jute is high compared to the other eight samples. Furthermore, morphological analysis and thermogravimetric analysis (TGA) have been carried out with Sample 9. While comparing the properties of with the existing dashboard material properties, they show more desirable values and thus, the compositions of Sample 9 material can be used for various vehicle parts. When the experimental results are compared with the finite element analysis (FEA) results, the experimental results match with the FEA results, and few variations are noticed.

• Jezik: Angleški jezik
• Ključne besede: thermogravimetric analysis, morphological analysis, jute, hemp, bamboo, finite element analysis
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: Str. 534-544
• Številčenje: Vol. 67, no. 10
• PID: 20.500.12556/RUL-132552
• UDK: 519.62:676.034
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2021.7272
• COBISS.SI-ID: 82752515
• Datum objave v RUL: 28.10.2021

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Karakterizacija mehanskih lastnosti in strukturni atributi biohibridnih kompozitov na osnovi vlaken iz konoplje, bambusa in jute : alternativni pristop k uporabi naravnih vlaken za avtomobilske dele
• Ključne besede: termogravimetrična analiza, morfološka analiza, juta, konoplja, bambus, analiza po metodi končnih elementov