izpis_h1_title_alt

Effectiveness of automatic cam programming using machining templates for the manufacture of special production tooling
Kowalski, Maciej (Avtor), Zawadzki, Przemysław (Avtor), Hamrol, Adam (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,84 MB)
MD5: E296DDC8B84088A9B2D857B0C40772DF
URLURL - Izvorni URL, za dostop obiščite https://www.sv-jme.eu/sl/article/effectiveness-of-automatic-cam-programming-using-machining-templates-for-manufacture-of-special-production-tooling/ Povezava se odpre v novem oknu

Izvleček
The paper presents the methodology and implementation of original Automatic CAM programming using machining templates (ACPUT) dedicated to manufacturing special technological tooling. The development of ACPUT was inspired by the observation that although modern computer-aided design (CAD) / computer-aided manufacturing (CAM) systems can automatically create CAM programs, their universality makes them both difficult to use and inefficient because the programs created this way often contain errors. The presented programming procedure includes the development of specific machining templates based on technological knowledge gathered in a specially prepared database. These templates are dedicated to a group of parts characterized by the similarity of their geometric features. ACPUT makes it possible to reduce(in comparison to traditional CAM programming) the time required to develop a machining program, thereby positively impacting the total cost of tooling production. The paper aims to present results of testing the effectiveness of the use of ACPUT by technicians with different levels of experience (expert and beginner). The tests were carried out on special tooling - assembly equipment for plastic pipes, and compared program preparation time, machining time, and production costs.

Jezik:Angleški jezik
Ključne besede:generative CAM process, CNC programming, technology design automation, knowledge-based engineering
Vrsta gradiva:Članek v reviji (dk_c)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2021
Št. strani:Str. 475-488
Številčenje:Vol. 67, no. 10
UDK:004.92:621.9
ISSN pri članku:0039-2480
DOI:10.5545/sv-jme.2021.7285 Povezava se odpre v novem oknu
COBISS.SI-ID:82581763 Povezava se odpre v novem oknu
Število ogledov:103
Število prenosov:26
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.]
ISSN:0039-2480
COBISS.SI-ID:762116 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Uspešnost samodejnega programiranja CAM s predlogami za strojno obdelavo v proizvodnji specialnih produkcijskih orodij
Ključne besede:generativni proces CAM, CNC programiranje, avtomatizacija tehnološke priprave, na znanju temelječi inženiring

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj