Influence of a diamond-like carbon-coated mechanical part on the operation of an orbital hydraulic motor in water

Strmčnik, Ervin (avtor), Majdič, Franc (avtor), Kalin, Mitjan (avtor)

The increasing focus on reducing the environmental impact of hydraulic applications has driven efforts to apply new surface-engineering technologies and replace classic lubricants with alternative solutions. In particular, water has gained increasing attention in recent years. However, water has very poor lubrication properties and, especially in combination with steel/steel contact, it leads to severe tribological behavior. A literature review and preliminary research showed that appropriate surface engineering regarding diamond-like carbon (DLC) coatings represents a promising solution to overcome the limitation of steel/steel contacts in water. Basic tribological ball-on-disc tests were performed. The result of the tribological investigation showed that there was very low friction and wear in the steel/DLC contact in water. This was our motivation for using DLC coating in a real hydraulic application. The DLC was deployed on the floating outer ring, so steel/DLC contacts between the floating outer ring and three other important parts were created. It was proven that the poor lubrication properties of the water were overcome with appropriate surface engineering. In such a case, the hydraulic motor operated satisfactorily when the water was applied as a working fluid.

• Jezik: Angleški jezik
• Ključne besede: diamond-like carbon, efficiency, orbital hydraulic motor, surface engineering, water
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2019
• Št. strani: 14 str.
• Številčenje: Vol. 9, iss. 4, art. 466
• PID: 20.500.12556/RUL-132324
• UDK: 539.92:62-761:544.227(045)
• ISSN pri članku: 2075-4701
• DOI: 10.3390/met9040466
• COBISS.SI-ID: 16590107
• Datum objave v RUL: 21.10.2021

STRMČNIK, Ervin, MAJDIČ, Franc in KALIN, Mitjan, 2019, Influence of a diamond-like carbon-coated mechanical part on the operation of an orbital hydraulic motor in water. Metals [na spletu]. 2019. Vol. 9, no. 4,  466. [Dostopano 26 april 2025]. DOI 10.3390/met9040466. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=132324

Gradivo je del revije

• Naslov: Metals
• Skrajšan naslov: Metals
• Založnik: MDPI AG
• ISSN: 2075-4701
• COBISS.SI-ID: 15976214

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 22.04.2019

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: diamantu podobne prevleke, izkoristki, orbitalni hidravlični motorji, inženiring površin, voda

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: 1000-18-0510