izpis_h1_title_alt

Influence of a diamond-like carbon-coated mechanical part on the operation of an orbital hydraulic motor in water
Strmčnik, Ervin (Avtor), Majdič, Franc (Avtor), Kalin, Mitjan (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (8,76 MB)
MD5: 524255098785FA0D70DBF7A09739CB46
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2075-4701/9/4/466 Povezava se odpre v novem oknu

Izvleček
The increasing focus on reducing the environmental impact of hydraulic applications has driven efforts to apply new surface-engineering technologies and replace classic lubricants with alternative solutions. In particular, water has gained increasing attention in recent years. However, water has very poor lubrication properties and, especially in combination with steel/steel contact, it leads to severe tribological behavior. A literature review and preliminary research showed that appropriate surface engineering regarding diamond-like carbon (DLC) coatings represents a promising solution to overcome the limitation of steel/steel contacts in water. Basic tribological ball-on-disc tests were performed. The result of the tribological investigation showed that there was very low friction and wear in the steel/DLC contact in water. This was our motivation for using DLC coating in a real hydraulic application. The DLC was deployed on the floating outer ring, so steel/DLC contacts between the floating outer ring and three other important parts were created. It was proven that the poor lubrication properties of the water were overcome with appropriate surface engineering. In such a case, the hydraulic motor operated satisfactorily when the water was applied as a working fluid.

Jezik:Angleški jezik
Ključne besede:diamond-like carbon, efficiency, orbital hydraulic motor, surface engineering, water
Vrsta gradiva:Članek v reviji (dk_c)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2019
Št. strani:14 str.
Številčenje:Vol. 9, iss. 4, art. 466
UDK:539.92:62-761:544.227(045)
ISSN pri članku:2075-4701
DOI:10.3390/met9040466 Povezava se odpre v novem oknu
COBISS.SI-ID:16590107 Povezava se odpre v novem oknu
Število ogledov:91
Število prenosov:36
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Metals
Skrajšan naslov:Metals
Založnik:MDPI
ISSN:2075-4701
COBISS.SI-ID:15976214 Povezava se odpre v novem oknu

Gradivo je financirano iz projekta

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije (ARRS)
Številka projekta:1000-18-0510

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:22.04.2019

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:diamantu podobne prevleke, izkoristki, orbitalni hidravlični motorji, inženiring površin, voda

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj