Pre-processing of point-data from contact and optical 3D digitization sensors

Budak, Igor (avtor), Vukelić, Djordje (avtor), Bračun, Drago (avtor), Hodolič, Janko (avtor), Soković, Mirko (avtor)

Contemporary 3D digitization systems employed by reverse engineering (RE) feature ever-growing scanning speeds with the ability to generate large quantity of points in a unit of time. Although advantageous for the quality and efficiency of RE modelling, the huge number of point datas can turn into a serious practical problem, later on, when the CAD model is generated. In addition, 3D digitization processes are very often plagued by measuring errors, which can be attributed to the very nature of measuring systems, various characteristics of the digitized objects and subjective errors by the operator, which also contribute to problems in the CAD model generation process. This paper presents an integral system for the pre-processing of point data, i.e., filtering, smoothing and reduction, based on a cross-sectional RE approach. In the course of the proposed system development, major emphasis was placed on the module for point data reduction, which was designed according to a novel approach with integrated deviation analysis and fuzzy logic reasoning. The developed system was verified through its application on three case studies, on point data from objects of versatile geometries obtained by contact and laser 3D digitization systems. The obtained results demonstrate the effectiveness of the system.

• Jezik: Angleški jezik
• Ključne besede: reverse engineering, 3D digitization, point data pre-processing, optical triangulation sensors, fuzzy logic, contact sensor
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2012
• Št. strani: Str. 1100-1126
• Številčenje: Vol. 12, iss. 1
• PID: 20.500.12556/RUL-129520
• UDK: 004.62:658.5
• ISSN pri članku: 1424-8220
• DOI: 10.3390/s120101100
• COBISS.SI-ID: 12177691
• Datum objave v RUL: 03.09.2021

BUDAK, Igor, VUKELIĆ, Djordje, BRAČUN, Drago, HODOLIČ, Janko in SOKOVIĆ, Mirko, 2012, Pre-processing of point-data from contact and optical 3D digitization sensors. Sensors [na spletu]. 2012. Vol. 12, no. 1, p. 1100–1126. [Dostopano 3 april 2025]. DOI 10.3390/s120101100. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=129520

Gradivo je del revije

• Naslov: Sensors
• Skrajšan naslov: Sensors
• Založnik: MDPI
• ISSN: 1424-8220
• COBISS.SI-ID: 10176278

Licence

• Licenca: CC BY 3.0, Creative Commons Priznanje avtorstva 3.0 Nedoločena
• Povezava: https://creativecommons.org/licenses/by/3.0/deed.sl
• Opis: Dovoljuje kopiranje in razširjanje vsebin v kakršnemkoli mediju in obliki. Dovoljuje remixanje, urejanje, predelava in vključevanje vsebine v lastna dela v vse namene, tudi komercialne. Primerno morate navesti avtorja, povezavo do licence in označiti spremembe, če so kakšne nastale. To lahko storite na kakršenkoli razumen način, vendar ne na način, ki bi namigoval na to, da dajalec licence podpira vas ali vašo uporabo dela. Ne smete uporabiti pravnih določil ali tehničnih ukrepov, ki bi pravno omejili ali onemogočilo druge, da bi storili karkoli, kar licenca dovoli.
• Začetek licenciranja: 20.01.2012

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: vzvratno inženirstvo, 3D digitalizacija, optični triangulacijski senzorji, redukcija podatkov, mehka logika

Projekti

• Financer: MESTD - Ministry of Education, Science and Technological Development of Republic of Serbia

• Financer: Drugi - Drug financer ali več financerjev
• Program financ.: Ministry of Higher Education, Science and Technology of Republic of Slovenia